1 - 5 |
The influence of the atrium geometry on the building energy performance Aldawoud A |
6 - 13 |
The effect of geometry factors on fenestration energy performance and energy savings in office buildings Susorova I, Tabibzadeh M, Rahman A, Clack HL, Elnimeiri M |
14 - 19 |
A novel system of the isothermal dehumidification in a room air-conditioner Han X, Zhang X, Wang LH, Niu RP |
20 - 25 |
Experimental investigations on the influence of ice floating in an internal melt ice-on-coil tank Lopez-Navarro A, Biosca-Taronger J, Torregrosa-Jaime B, Corberan JM, Bote-Garcia JL, Paya J |
26 - 33 |
Modelling and applications of annual energy-using simulation module of separated heat pipe heat exchanger Zhu DD, Yan D, Li Z |
34 - 41 |
BuildingLAB: A tool to analyze performance of model predictive controllers for buildings Cigler J, Tomasko P, Siroky J |
42 - 50 |
A new design of metal-sheet cool roof using PCM Chou HM, Chen CR, Nguyen VL |
51 - 57 |
Monitoring and energetic performance analysis of an innovative ventilation concept in a Belgian greenhouse Van den Bulck N, Coomans M, Wittemans L, Hanssens J, Steppe K |
58 - 64 |
Optimization of distributed generation capacities in buildings under uncertainty in load demand Rezvan AT, Gharneh NS, Gharehpetian GB |
65 - 73 |
Simulation model linked PV inverter implementation utilizing dSPACE DS1104 controller Ghani ZA, Hannan MA, Mohamed A |
74 - 94 |
Passive cooling dissipation techniques for buildings and other structures: The state of the art Santamouris M, Kolokotsa D |
95 - 102 |
A life cycle energy analysis of social housing in Brazil: Case study for the program "MY HOUSE MY LIFE" Paulsen JS, Sposto RM |
103 - 109 |
Optimum combinations of building envelop energy-saving technologies for office buildings in different climatic regions of China Zhou SY, Zhao J |
110 - 118 |
Approaches to evaluate building energy performance from daily consumption data considering dynamic and solar gain effects Danov S, Carbonell J, Cipriano J, Marti-Herrero J |
119 - 131 |
The impact of configuration and orientation of solar thermosyphonic systems on night ventilation and fan energy savings Koronaki IP |
132 - 143 |
A hybrid model-based fault detection strategy for air handling unit sensors Yang XB, Jin XQ, Du ZM, Zhu YH, Guo YB |
144 - 154 |
An empirical validation of lighting energy consumption using the integrated simulation method Yun G, Kim KS |
155 - 164 |
An explanation of residential energy-efficiency retrofit behavior in Canada Gamtessa SF |
165 - 175 |
Modeling ventilated slab systems using a hollow core slab: Implementation in a whole building energy simulation program Chae YT, Strand RK |
176 - 186 |
The effectiveness of retrofitting existing public buildings in face of future climate change in the hot summer cold winter region of China Chow DHC, Li ZL, Darkwa J |
187 - 192 |
Hygrothermal properties of building envelopes: Reliability of the effectiveness of energy saving Antonyova A, Korjenic A, Antony P, Korjenic S, Pavlusova E, Pavlus M, Bednar T |
193 - 198 |
Method and case study of quantitative uncertainty analysis in building energy consumption inventories Lu YH, Huang ZJ, Zhang T |
199 - 209 |
Performance of radiant cooling surfaces with respect to energy consumption and thermal comfort Oxizidis S, Papadopoulos AM |
210 - 219 |
Comparison of air change efficiency, contaminant removal effectiveness and infection risk as IAQ indices in isolation rooms Villafruela JM, Castro F, San Jose JF, Saint-Martin J |
220 - 226 |
Performance analysis of a new-design filled-type solar collector with double U-tubes Liang RB, Ma LD, Zhang JL, Zhao L |
227 - 236 |
Gypsum based composite materials with micro-encapsulated PCM: Experimental correlations for thermal properties estimation on the basis of the composition Toppi T, Mazzarella L |
237 - 244 |
Gas-fired instantaneous water heaters with combustion chamber sealed with respect to the room in multi-storey residential buildings-Results of pilot plants tests Czerski G, Gebhardt Z, Strugala A, Butrymowicz C |
245 - 249 |
A new parametric equation for the wind pressure coefficient for low-rise buildings Muehleisen RT, Patrizi S |
250 - 260 |
Feasibility study on a novel methodology for short-term real-time energy demand prediction using weather forecasting data Kwak Y, Seo D, Jang C, Huh JH |
261 - 267 |
Micro-sources design of an intelligent building integrated with micro-grid Zeng Z, Zhao RX, Yang H |
268 - 277 |
Nanoferrofluid addition enhances ammonia/water bubble absorption in an external magnetic field Wu WD, Liu G, Chen SX, Zhang H |
278 - 288 |
An intelligent chiller fault detection and diagnosis methodology using Bayesian belief network Zhao Y, Xiao F, Wang SW |
289 - 301 |
An experimentally validated mathematical and CFD model of a supply air window: Forced and natural flow Bhamjee M, Nurick A, Madyira DM |
302 - 312 |
Multiple regression model for fast prediction of the heating energy demand Catalina T, Iordache V, Caracaleanu B |
313 - 323 |
Impacts of occupant behaviours on residential heating consumption for detached houses in a temperate climate in the northern part of Europe de Meester T, Marique AF, De Herde A, Reiter S |
324 - 337 |
Optimum building energy retrofits under technical and economic uncertainty Rysanek AM, Choudhary R |
338 - 345 |
Energy and exergy analyses of porous baffles inserted solar air heaters for building applications Bayrak F, Oztop HF, Hepbasli A |
346 - 353 |
Energy saving potential of a hybrid ventilation system integrated with heat storage material Kwon OH, Kim MH, Choi AS, Jeong JW |
354 - 360 |
Economic efficiency of social housing thermal upgrade in Mediterranean climate Desogus G, Di Pilla L, Mura S, Pisano GL, Ricciu R |
361 - 372 |
Optimizing building comfort temperature regulation via model predictive control Alvarez JD, Redondo JL, Camponogara E, Normey-Rico J, Berenguel M, Ortigosa PM |