1 - 10 |
Transparent thermal insulation coatings for energy efficient glass windows and curtain walls Qu J, Song JR, Qin J, Song ZN, Zhang WD, Shi YX, Zhang T, Zhang HQ, Zhang RP, He ZY, Xue X |
11 - 16 |
Preparation, stability and mechanical property of shape-stabilized phase change materials Wang Y, Wang SY, Wang JP, Yang R |
17 - 27 |
A dynamic simulation method of ground coupled heat pump system based on borehole heat exchange effectiveness Yang WB, Zhang SS, Chen YP |
28 - 39 |
Optimizing insulation thickness and analysing environmental impacts of aerogel-based thermal superinsulation in buildings Cuce E, Cuce PM, Wood CJ, Riffat SB |
40 - 47 |
Analysis on existent thermal insulating plasters towards innovative applications: Evaluation methodology for a real cost-performance comparison Barbero S, Dutto M, Ferrua C, Pereno A |
48 - 57 |
Study of hygrothermal behaviour of a hemp concrete building envelope under summer conditions in France Maalouf C, Le ADT, Umurigirwa SB, Lachi M, Douzane O |
58 - 66 |
Renovation alternatives to improve energy performance of historic rural houses in the Baltic Sea region Alev U, Eskola L, Arumagi E, Jokisalo J, Donarelli A, Siren K, Brostrom T, Kalamees T |
67 - 79 |
Predicting visual comfort in side-lit open-plan core zones: Results of a field study pairing high dynamic range images with subjective responses Konis K |
80 - 90 |
The effect of transition gradient in thermochromic glazing systems Warwick MEA, Ridley I, Binions R |
91 - 102 |
Performance analysis of a hybrid air-conditioning system dehumidified by liquid desiccant with low temperature and low concentration Chen Y, Yin YG, Zhang XS |
103 - 111 |
Approach for integrated optimization of community heating system at urban detailed planning stage Huang ZS, Yu H |
112 - 129 |
Regional analysis of building distributed energy costs and CO2 abatement: A U.S.-China comparison Mendes G, Feng W, Stadler M, Steinbach J, Lai J, Zhou N, Marnay C, Ding Y, Zhao J, Tian Z, Zhu N |
130 - 138 |
Optimal PV cell coverage ratio for semi-transparent photovoltaics on office building facades in central China Xu S, Liao W, Huang J, Kang J |
139 - 148 |
Thermodynamic investigation of building integrated energy efficiency for building retrofit Wang P, Gong GC, Wang Y, Li L |
149 - 157 |
Experimental study on the thermal performance of tunnel lining ground heat exchangers Zhang GZ, Xia CC, Yang Y, Sun M, Zou YC |
158 - 170 |
Importance of building orientation in determining daylighting quality in student dorm rooms: Physical and simulated daylighting parameters' values compared to subjective survey results Jovanovic A, Pejic P, Djoric-Veljkovic S, Karamarkovic J, Djelic M |
171 - 179 |
Urban heat island effect on energy application studies of office buildings Sun YM, Augenbroe G |
180 - 191 |
Theoretical investigation of the thermal performance of a novel solar loop-heat-pipe facade-based heat pump water heating system He W, Hong XQ, Zhao XD, Zhang XX, Shen JC, Ji J |
192 - 196 |
Thermal adaptation and thermal environment in university classrooms and offices in Harbin Wang ZJ, Li AX, Ren J, He YN |
197 - 205 |
The effect of building envelope insulation on cooling energy consumption in summer Fang ZS, Li N, Li BZ, Luo GZ, Huang YQ |
206 - 218 |
Natural cross ventilation in buildings on Mediterranean coastal zones Faggianelli GA, Brun A, Wurtz E, Muselli M |
219 - 226 |
Novel sustainable hemp-based composites for application in the building industry: Physical, thermal and mechanical characterization Sassoni E, Manzi S, Motori A, Montecchi M, Canti M |
227 - 235 |
A multi-objective optimization model for the life-cycle cost analysis and retrofitting planning of buildings Wang B, Xia XH, Zhang JF |
236 - 246 |
Experimentally validated model for atmospheric water generation using a solar assisted desiccant dehumidification system Milani D, Qadir A, Vassallo A, Chiesa M, Abbas A |
247 - 255 |
The effectiveness of the sustainable flowing water film in improving the solar-optical properties of glazing in the tropics Qahtan A, Rao SP, Keumala N |
256 - 269 |
Estimation of an incipient fault using an adaptive neurofuzzy sliding-mode observer Zhou YM, Liu JJ, Dexter AL |
270 - 280 |
A robust occupancy detection and tracking algorithm for the automatic monitoring and commissioning of a building Shih HC |
281 - 291 |
Performance evaluation of an air conditioning system with different heights of supply outlet applied to a sleeping environment Mao N, Pan DM, Chan MY, Deng SM |
292 - 303 |
Statistical modeling of the building energy balance variable for screening of metered energy use in large commercial buildings Masuda H, Claridge DE |
304 - 312 |
Determining sustainable design management using passive design elements for a zero emission house during the schematic design Whang SW, Kim S |
313 - 322 |
Cost effectiveness of energy performance improvements in Estonian brick apartment buildings Kuusk K, Kalamees T, Maivel M |
323 - 331 |
Strategies for reducing heating and cooling loads of uninsulated rammed earth wall houses Dong X, Soebarto V, Griffith M |
332 - 342 |
The method of evaluating operation performance of HVAC system based on exergy analysis Fan B, Jin XQ, Fang X, Du ZM |
343 - 354 |
Spectral optical properties and thermodynamic performance of reflective coatings in a mild climate zone Cekon M, Kalousek M, Hraska J, Ingeli R |
355 - 363 |
Building integrated low concentration solar system for a self-sustainable Mediterranean villa: The Astonyshine house Aldegheri F, Baricordi S, Bernardoni P, Brocato M, Calabrese G, Guidi V, Mondardini L, Pozzetti L, Tonezzer M, Vincenzi D |
364 - 376 |
A multi-zone building energy simulation of a data center model with hot and cold aisles Phan L, Lin CX |
377 - 392 |
Handling model uncertainty in model predictive control for energy efficient buildings Maasoumy M, Razmara M, Shahbakhti M, Vincentelli AS |
393 - 400 |
Improvement of borehole thermal energy storage design based on experimental and modelling results Lanini S, Delaleux F, Py X, Olives R, Nguyen D |
401 - 415 |
Experimental study on electrical signatures of common faults for packaged DX rooftop units Li YH, Liu MS, Lau J, Zhang B |
416 - 424 |
Thermal performance of an innovative curtain-wall-integrated solar heater Lai CM, Hokoi S, Ho CJ |
425 - 431 |
Energy performance of direct expansion air handling unit in office buildings Yun GY, Choi J, Kim JT |
432 - 439 |
Experimental evaluation of the impacts of considering inherent response characteristics for lighting technologies in building energy modeling Ozenc S, Uzunoglu M, Guler O |
440 - 444 |
Evaluation method of gas engine-driven heat pump water heater under the working condition of summer Zhang X, Yang Z, Wu X, Su XC |
445 - 456 |
Integrated PV in shading systems for Mediterranean countries: Balance between energy production and visual comfort Mandalaki M, Tsoutsos T, Papamanolis N |
457 - 466 |
Sensitivity of facade performance on early-stage design variables Jin Q, Overend M |
467 - 477 |
Proper evaluation of the external convective heat transfer for the thermal analysis of cool roofs Costanzo V, Evola G, Marletta L, Gagliano A |