| 1 - 12 |
Study on the fate of metal elements from biomass in a bench-scale fluidized bed gasifier
Cui H, Turn SQ, Keffer V, Evans D, Tran T, Foley M |
| 13 - 18 |
Characterization of a regenerable sorbent for high temperature elemental mercury capture from flue gas
Scala F, Anacleria C, Cimino S |
| 19 - 23 |
Next generation of ceramic hot gas filter with safety fuses integrated in venturi ejectors
Heidenreich S, Haag W, Salinger M |
| 24 - 30 |
Hot gas filters for coal-based power generation systems: Operating experiences
Lupion M, Navarrete B, Alonso-Farinas B, Rodriguez-Galan M |
| 31 - 36 |
Laboratory investigations on chemical hot gas cleaning of inorganic trace elements for the "UNIQUE'' process
Stemmler M, Tamburro A, Muller M |
| 37 - 41 |
Integration of hot gas cleaning at temperatures above the ash melting point in IGCC
Muller M |
| 42 - 53 |
Design and performance evaluation of dry cleaning process for syngas
Sharma SD, McLennan K, Dolan M, Nguyen T, Chase D |
| 54 - 59 |
Chemical-mechanical bromination of biomass ash for mercury removal from flue gases
Bisson TM, Xu ZH, Gupta R, Maham Y, Liu Y, Yang HQ, Clark I, Patel M |
| 60 - 66 |
Measurement of PM2.5 and ultra-fine particulate emissions from coal-fired utility boilers
Lee SW, Herage T, Dureau R, Young B |
| 67 - 72 |
Emissions of particles and trace elements from coal gasification
Yoshiie R, Taya Y, Ichiyanagi T, Ueki Y, Naruse I |
| 73 - 79 |
Experimental study of fine particles removal in the desulfurated scrubbed flue gas
Bao JJ, Yang LJ, Yan JP, Xiong GL, Lu B, Xin CY |
| 80 - 84 |
Desulfurization behavior of zinc oxide based sorbent modified by the combination of Al2O3 and K2CO3
Ju SG, Zhao YS, Fan HL, Liang LT, Shen F, Miao MQ |
| 85 - 90 |
Gas cleaning challenges for coal-fired oxy-fuel technology with carbon capture and storage
Wall T, Stanger R, Liu YH |
| 91 - 98 |
Sulfur removal property of activated-char-supported Fe-Mo sorbents for integrated cleaning of hot coal gases
Yu JL, Yin FK, Wang SY, Chang LP, Gupta S |
| 99 - 111 |
High temperature gas filtration with ceramic candles and ashes characterisation during steam-oxygen blown gasification of biomass
Simeone E, Siedlecki M, Nacken M, Heidenreich S, de Jong W |
| 112 - 130 |
A review of research progress on CO2 capture, storage, and utilization in Chinese Academy of Sciences
Li L, Zhao N, Wei W, Sun YH |
| 131 - 136 |
Laboratory scale studies of Pd/gamma-Al2O3 sorbents for the removal of trace contaminants from coal-derived fuel gas at elevated temperatures
Rupp EC, Granite EJ, Stanko DC |
| 137 - 142 |
CH4 and CO2 sorption isotherms and kinetics for different size fractions of two coals
Han FS, Busch A, Krooss BM, Liu ZY, Yang JL |
| 143 - 148 |
Selective oxidation of hydrogen sulfide to sulfur over activated carbon-supported metal oxides
Fang HB, Zhao JT, Fang YT, Huang JJ, Wang Y |
| 149 - 158 |
Carbon supported vanadia for multi-pollutants removal from flue gas
Liu QY, Liu ZY |
| 159 - 165 |
Optimization of digested chicken manure filtrate supplementation for lipid overproduction in heterotrophic culture Chlorella protothecoides
Liang GB, Mo YW, Zhou QF |
| 166 - 176 |
Experimental and modeling study of chemical-kinetics mechanisms for H-2-NH3-air mixtures in laminar premixed jet flames
Kumar P, Meyer TR |
| 177 - 183 |
Impinging flame ignition and propagation visualisation using Schlieren and colour-enhanced stereo imaging techniques
Wang Q, Huang HW, Zhang Y, Zhao CY |
| 184 - 189 |
Adsorptive desulfurization of diesel by regenerable nickel based adsorbents
Dasgupta S, Gupta P, Aarti, Nanoti A, Goswami AN, Garg MO, Tangstad E, Vistad OB, Karlsson A, Stocker M |
| 190 - 196 |
Modelling spontaneous ignition of wood, char and RDF in a lab-scale packed bed
van Blijderveen M, Bramer EA, Brem G |
| 197 - 207 |
Some advantages and challenges of running a Euro IV, V6 diesel engine on a gasoline fuel
Kalghatgi GT, Gurubaran RK, Davenport A, Harrison AJ, Hardalupas Y, Taylor AMKP |
| 208 - 215 |
Evaluation of gasoline-ethanol-water ternary mixtures used as a fuel for an Otto engine
Kyriakides A, Dimas V, Lymperopoulou E, Karonis D, Lois E |
| 216 - 230 |
A comparative study of straw, perennial grasses and hardwoods in terms of fast pyrolysis products
Greenhalf CE, Nowakowski DJ, Harms AB, Titiloye JO, Bridgwater AV |
| 231 - 237 |
A combination effect of reburn, post-flame air and acoustic excitation on NOx reduction
Hassan MI, Wu TW, Saito K |
| 238 - 246 |
NO formation tendency characterization for solid fuels in fluidized beds
Konttinen J, Kallio S, Hupa M, Winter F |
| 247 - 253 |
Development of a WD-XRF analysis method of minor and trace elements in liquid petroleum products
Gazulla MF, Orduna M, Vicente S, Rodrigo M |
| 254 - 260 |
A study on mass transfer-reaction kinetics of NO absorption by using UV/H2O2/NaOH process
Liu YX, Pan JF, Tang AK, Wang Q |
| 261 - 268 |
The dominant mechanism of enhanced heavy oil recovery by chemical flooding in a two-dimensional physical model
Zhou XD, Dong MZ, Maini B |
| 269 - 276 |
Liquid-liquid and vapor-liquid equilibrium data for biodiesel reaction-separation systems
da Silva DIS, Mafra MR, da Silva FR, Ndiaye PM, Ramos LP, Cardozo L, Corazza ML |
| 277 - 281 |
Kinetics of soybean oil hydrolysis in subcritical water
Milliren AL, Wissinger JC, Gottumukala V, Schall CA |
| 282 - 291 |
Upgrading of associated petroleum gas into methane-rich gas for power plant feeding applications. Technological and economic benefits
Zyryanova MM, Snytnikov PV, Amosov YI, Belyaev VD, Kireenkov VV, Kuzin NA, Vernikovskaya MV, Kirillov VA, Sobyanin VA |
| 292 - 302 |
Petrophysical characterization of Chinese coal cores with heat treatment by nuclear magnetic resonance
Cai YD, Liu DM, Pan ZJ, Yao YB, Li JQ, Qiu YK |
| 303 - 310 |
Classification performance evaluation of floatex density separator for coal fines
Kumar CR, Bhoja SK, Tripathy SK, Mohanan S, Venugopalan T, Suresh N |
| 311 - 318 |
Co-pyrolysis of palm shell and polystyrene waste mixtures to synthesis liquid fuel
Abnisa F, Daud WMAW, Ramalingam S, Azemi MNB, Sahu JN |
| 319 - 333 |
Synergetic effects of mixed copper-iron oxides oxygen carriers in chemical looping combustion
Siriwardane R, Tian HJ, Simonyi T, Poston J |
| 334 - 340 |
Experimental study on the performance of recooling cycle of hydrocarbon fueled scramjet engine
Qin J, Zhang SL, Bao W, Jia ZJ, Yu B, Zhou WX |
| 341 - 350 |
The influence of temperature and steam on the yields of tar and light hydrocarbon compounds during devolatilization of dried sewage sludge in a fluidized bed
Fuentes-Cano D, Gomez-Barea A, Nilsson S, Ollero P |
| 351 - 355 |
Introduction of a novel fluorescence based method for the composition estimation of petroleum fuel-biofuel blends
Prakash J, Mishra AK |
| 356 - 369 |
Thermodynamic modelling and evaluation of a two-stage thermal process for waste gasification
Materazzi M, Lettieri P, Mazzei L, Taylor R, Chapman C |
| 370 - 384 |
Coal direct chemical looping combustion process: Design and operation of a 25-kW(th) sub-pilot unit
Kim HR, Wang DW, Zeng L, Bayham S, Tong A, Chung E, Kathe MV, Luo SW, McGiveron O, Wang AN, Sun ZC, Chen D, Fan LS |
| 385 - 390 |
Thermal dissolution of Shenfu coal in different solvents
Shui HF, Zhou Y, Li HP, Wang ZC, Lei ZP, Ren SB, Pan CX, Wang WW |
| 391 - 399 |
Viscoelastic properties and constitutive modelling of bitumen
Behzadfar E, Hatzikiriakos SG |
| 400 - 408 |
Effects of temperature on the yields and properties of bio-oil from the fast pyrolysis of mallee bark
Mourant D, Lievens C, Gunawan R, Wang Y, Hu X, Wu LP, Syed-Hassan SSA, Li CZ |
| 409 - 416 |
An advanced biomass gasification technology with integrated catalytic hot gas cleaning Part I. Technology and initial experimental results in a lab-scale facility
Dong L, Asadullah M, Zhang S, Wang XS, Wu HW, Li CZ |
| 417 - 429 |
Revisiting the PC-SAFT characterization procedure for an improved asphaltene precipitation prediction
Punnapala S, Vargas FM |
| 430 - 438 |
Effect of catalytic site position: Nickel nanocatalyst selectively loaded inside or outside carbon nanotubes for methane dry reforming
Ma QX, Wang D, Wu MB, Zhao TS, Yoneyama Y, Tsubaki N |
| 439 - 444 |
- Formation of coke during the pyrolysis of bio-oil
Wang Y, Mourant D, Hu X, Zhang S, Lievens C, Li CZ |
| 445 - 450 |
Experimental study on chemical recuperation process of endothermic hydrocarbon fuel
Qin J, Zhang SL, Bao W, Yu WL, Yu B, Zhou WX, Yu DR |
| 451 - 464 |
A study on catalytic pyrolysis of biomass with Y-zeolite based FCC catalyst using response surface methodology
Mante OD, Agblevor FA, McClung R |
| 465 - 473 |
The use of La1-xSrxFeO3 perovskite-type oxides as oxygen carriers in chemical-looping reforming of methane
He F, Li XN, Zhao K, Huang Z, Wei GQ, Li HB |
| 474 - 483 |
Oxy-fuel combustion effects on trace metals behaviour by equilibrium calculations
Contreras ML, Garcia-Frutos FJ, Bahillo A |
| 484 - 489 |
A method to target and correct sources of unburned carbon in coal-fired utility boilers
Gao H, Majeski AJ, Runstedtler A |
| 490 - 501 |
Catalytic conversion of benzothiophene over a H-ZSM5 based catalyst
Al-Bogami SA, de Lasa HI |
| 502 - 514 |
A new screening tool for evaluation of steamflooding performance in Naturally Fractured Carbonate Reservoirs
Shafiei A, Dusseault MB, Zendehboudi S, Chatzis I |
| 515 - 520 |
Mesoporous SAPO-34 with amine-grafting for CO2 capture
Kim JY, Kim J, Yang ST, Ahn WS |
| 521 - 533 |
Nickel-base superalloys for ultra-supercritical coal-fired power plants: Fireside corrosion. Laboratory studies and power plant exposures
Stein-Brzozowska G, Florez DM, Maier J, Scheffknecht G |
| 534 - 542 |
Performance improvement of dual fluidized bed gasifiers by temperature reduction: The behavior of tar species in the product gas
Kirnbauer F, Wilk V, Hofbauer H |
| 543 - 549 |
Analytical model for zeta potential of asphaltene
Das S, Thundat T, Mitra SK |
| 550 - 556 |
Predicting the slagging potential of co-fired coal with sewage sludge and wood biomass
Degereji MU, Gubba SR, Ingham DB, Ma L, Pourkashanian M, Williams A, Williamson J |
| 557 - 564 |
Methane and ethylene time-history measurements in n-butane and n-heptane pyrolysis behind reflected shock waves
Pyun SH, Ren W, Davidson DF, Hanson RK |
| 565 - 577 |
Application of a validated gasification model to determine the impact of coal particle grinding size on carbon conversion
Kumar M, Ghoniem AF |
| 578 - 585 |
Technical evaluation of a power generation process consuming municipal solid waste
de Souza-Santos ML, Ceribeli K |
| 586 - 596 |
Fly ash deposition modelling: Requirements for accurate predictions of particle impaction on tubes using RANS-based computational fluid dynamics
Weber R, Schaffel-Mancini N, Mancini M, Kupka T |
| 597 - 603 |
Improved Fischer-Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts
Wang SR, Yin QQ, Guo JF, Ru B, Zhu LJ |
| 604 - 611 |
Esterification of oleic acid using 12-tungstophosphoric supported in flint kaolin of the Amazonia
Lacerda OD, Cavalcanti RM, de Matos TM, Angelica RS, da Rocha GN, Barros IDL |
| 612 - 619 |
Free fatty acids esterification of waste cooking oil and its mixtures with rapeseed oil and diesel
Boffito DC, Pirola C, Galli F, Di Michele A, Bianchi CL |
| 620 - 628 |
Water-gas shift modeling in coal gasification in an entrained-flow gasifier - Part 2: Gasification application
Lu XJ, Wang T |
| 629 - 638 |
Water-gas shift modeling in coal gasification in an entrained-flow gasifier. Part 1: Development of methodology and model calibration
Lu XJ, Wang T |
| 639 - 646 |
Kinetic and thermodynamic studies on the thermal behaviour of fly ash from lignite coals
Boycheva S, Zgureva D, Vassilev V |
| 647 - 655 |
Monitoring the liquid/liquid extraction of naphthenic acids in brazilian crude oil using electrospray ionization FT-ICR mass spectrometry (ESI FT-ICR MS)
Colati KAP, Dalmaschio GP, de Castro EVR, Gomes AO, Vaz BG, Romao W |
| 656 - 667 |
Dynamic Elemental Thermal Analysis (DETA) - A characterisation technique for the production of biochar and bio-oil from biomass resources
Stanger R, Wall T, Lucas J, Mahoney M |
| 668 - 674 |
Combustion and emission characteristics of a HCCI engine fuelled with n-butanol-gasoline blends
He BQ, Liu MB, Yuan J, Zhao H |
| 675 - 681 |
Prediction of minimum miscibility pressure in oil reservoirs using a modified SAFT equation of state
Fazlali A, Nikookar M, Agha-Aminiha A, Mohammadi AH |
| 682 - 690 |
The effect of supercritical water on coal pyrolysis and hydrogen production: A combined ReaxFF and DFT study
Zhang JL, Weng XX, Han Y, Li W, Cheng JY, Gan ZX, Gu JJ |
| 691 - 698 |
DNS analysis of a three-dimensional supersonic turbulent lifted jet flame
Luo K, Jin T, Lu SQ, Fan JR |
| 699 - 708 |
Investigation on the behaviour of a DI diesel engine fueled with Jatropha Methyl Ester (JME) and Tyre Pyrolysis Oil (TPO) blends
Sharma A, Murugan S |
| 709 - 714 |
Comparison of glycerol ketals, glycerol acetates and branched alcohol-derived fatty esters as cold-flow improvers for palm biodiesel
Giraldo SY, Rios LA, Suarez N |
| 715 - 722 |
Removal of naphthenic acids from crude oil using amino acid ionic liquids
Anderson K, Goodrich P, Hardacre C, Hussain A, Rooney DW, Wassell D |
| 723 - 730 |
Factors influencing the characterization of bubbles produced by coaxial gas-particle jet flow
Lu H, Liu HF, Li WF, Xu JL |
| 731 - 739 |
Autothermal reforming of synthetic JP-8 derived from a coal syngas stream
Scenna R, DuBois TG, Nieh S |
| 740 - 748 |
Oxidative dehydrogenation of ethylbenzene with CO2 for styrene production over porous iron-based catalysts
Castro AJR, Soares JM, Filho JM, Oliveira AC, Campos A, Milet ERC |
| 749 - 757 |
Synergistic kinetic inhibition of natural gas hydrate formation
Daraboina N, Malmos C, von Solms N |
| 758 - 770 |
Air assisted atomization and spray density characterization of ethanol and a range of biodiesels
Kourmatzis A, Pham PX, Masri AR |
| 771 - 779 |
Long term storage of biodiesel/petrol diesel blends in polyethylene fuel tanks
Thompson MR, Mu B, Ewaschuk CM, Cai Y, Oxby KJ, Vlachopoulos J |
| 780 - 792 |
Numerical simulation of thermal and reaction waves for in situ combustion in hydrocarbon reservoirs
Youtsos MSK, Mastorakos E |
| 793 - 796 |
Effect of fractional winterization of beef tallow biodiesel on the cold flow properties and viscosity
Dogan TH, Temur H |
| 797 - 811 |
The Research and Motor octane numbers of Liquefied Petroleum Gas (LPG)
Morganti KJ, Foong TM, Brear MJ, da Silva G, Yang Y, Dryer FL |
| 812 - 823 |
The gasification reactivity of high-heating-rate chars in single and mixed atmospheres of H2O and CO2
Guizani C, Sanz FJE, Salvador S |
| 824 - 832 |
The spherically symmetric droplet burning characteristics of Jet-A and biofuels derived from camelina and tallow
Liu YC, Savas AJ, Avedisian CT |
| 833 - 839 |
Alkali activated materials based on fluid catalytic cracking catalyst residue (FCC): Influence of SiO2/Na2O and H2O/FCC ratio on mechanical strength and microstructure
Tashima MM, Akasaki JL, Melges JLP, Soriano L, Monzo J, Paya J, Borrachero MV |
| 840 - 845 |
Measurement and prediction of speeds of sound of fatty acid ethyl esters and ethylic biodiesels
Freitas SVD, Santos A, Moita MLCJ, Follegatti-Romero LA, Dias TPVB, Meirelles AJA, Daridon JL, Lima AS, Coutinho JAP |
| 846 - 849 |
Visible light photoactivity of sulfur and phosphorus doped nanoporous carbons in oxidation of dibenzothiophenes
Seredych M, Bandosz TJ |
| 850 - 854 |
A novel PdAg/TiO2 nanotube electrocatalyst for methanol electro-oxidation
Ju JF, Chen X, Shi YJ, Wu DH |
| 855 - 858 |
Characterization and production of Ceiba pentandra biodiesel and its blends
Silitonga AS, Ong HC, Mahlia TMI, Masjuki HH, Chong WT |
