| 1 - 8 |
Optimization of composite additives for improving stability of bio-oils
Yin RZ, Zhang L, Liu RH, Mei YF, Yu WJ |
| 9 - 15 |
Removal of NO by methane over iron in simulated flue gas with SO2
Su YX, Zhao BT, Deng WY |
| 16 - 26 |
Fouling propensity of high-phosphorus solid fuels: Predictive criteria and ash deposits characterisation of sunflower hulls with P/Ca-additives in a drop tube furnace
De Fusco L, Boucquey A, Blondeau J, Jeanmart H, Contino F |
| 27 - 38 |
A comparison of butanol and ethanol flame development in an optical spark ignition engine
Moxey BG, Cairns A, Zhao H |
| 39 - 48 |
Activated carbon and graphite facilitate the upgrading of Indonesian lignite with microwave irradiation for slurryability improvement
Zhou F, Cheng J, Liu JZ, Wang ZH, Zhou JH, Cen KF |
| 49 - 59 |
Effects of iso-butanol/diesel and n-pentanol/diesel blends on performance and emissions of a DI diesel engine under premixed LTC (low temperature combustion) mode
Kumar BR, Saravanan S |
| 60 - 66 |
Effects of water vapor and Na/K additives on NO reduction through advanced biomass reburning
Lu P, Hao JT, Yu W, Zhu XM, Dai X |
| 67 - 76 |
Study of cylinder-to-cylinder variation in a diesel engine fueled with diesel/methanol dual fuel
Chen ZF, Yao CD, Wang QG, Han GP, Dou ZC, Wei HY, Wang B, Liu MJ, Wu TY |
| 77 - 83 |
Optimization of renewable C5 and C6 alkane production from acidic biomass hydrolysate over Ru/C catalyst
Weng YJ, Qiu SB, Wang CG, Chen LG, Yuan ZQ, Ding MY, Zhang Q, Ma LL, Wang TJ |
| 84 - 91 |
Characterization of typical 3D pore networks of Jiulaodong formation shale using nano-transmission X-ray microscopy
Wang Y, Pu J, Wang LH, Wang JQ, Jiang Z, Song YF, Wang CC, Wang YF, Jin C |
| 92 - 99 |
Combustion characteristics of waste sludge at air and oxy-fuel combustion conditions in a circulating fluidized bed reactor
Jang HN, Kim JH, Back SK, Sung JH, Yoo HM, Choi HS, Seo YC |
| 100 - 106 |
Adsorption desulfurization by hierarchical porous organic polymer of poly-methylbenzene with metal impregnation
Xia YT, Li YK, Gu YT, Jin T, Yang Q, Hu J, Liu HL, Wang HL |
| 107 - 114 |
Microwave assisted synthesis of biodiesel from soybean oil: Effect of poly (lactic acid)-oligomer on cold flow properties, IC engine performance and emission characteristics
Tesfaye M, Katiyar V |
| 115 - 129 |
Investigation of relations between properties of vacuum residual oils from different origin, and of their deasphalted and asphaltene fractions
Stratiev D, Shishkova I, Tsaneva T, Mitkova M, Yordanov D |
| 130 - 140 |
Potassium acetate supported on activated carbon for transesterification of new non-edible oil, bitter almond oil
Fadhil AB, Aziz AM, Altamer MH |
| 141 - 160 |
Combustion of pelleted sewage sludge with reference to coal and biomass
Kijo-Kleczkowska A, Sroda K, Kosowska-Golachowska M, Musial T, Wolski K |
| 161 - 175 |
Use of 1-vinyl imidazole based surfmers for preparation of polyacrylamide-SiO2 nanocomposite through aza-Michael addition copolymerization reaction for rock wettability alteration
El-hoshoudy AN, Desouky SEM, Betiha MA, Alsabagh AM |
| 176 - 184 |
Effects of rapid burning characteristics on the vibration of a common-rail diesel engine fueled with diesel-methanol dual-fuel
Li YY, Zhang CH, Yu W, Wu H |
| 185 - 196 |
Study of two impinging flow microsystems arranged in series. Application to emulsified biofuel production
Belkadi A, Tarlet D, Montillet A, Bellettre J, Massoli P |
| 197 - 209 |
The influence of addition of coal tar pitch (CTP) and expired pharmaceuticals (EP) on properties and composition of pyrolysis products for lower and higher rank coals
Zubkova V, Czaplicka M, Puchala A |
| 210 - 225 |
Effect of geometrical contraction on vortex breakdown of swirling turbulent flow in a model combustor
Wu Y, Carlsson C, Szasz R, Peng L, Fuchs L, Bai XS |
| 226 - 234 |
Batch fluidized bed test of SATS-derived CaO/TiO2-Al2O3 sorbent for calcium looping
Peng WW, Xu ZW, Zhao HB |
| 235 - 244 |
Effects of pressure and temperature on laminar burning velocity and flame instability of iso-octane/methane fuel blend
Baloo M, Dariani BM, Akhlaghi M, AghaMirsalim M |
| 245 - 253 |
Comparison of properties of a compression ignition engine operating on diesel-biodiesel blend with methanol additive
Zaglinskis J, Lukacs K, Bereczky A |
