1 - 11 |
Role of condensed phases in the agglomeration of low rank coal ash in fluidized beds Pallares J, Khadilkar AB, Simcock-Bailey B, Pisupati SV |
12 - 26 |
In-situ FTIR study on the mechanism of both steps of zeolite-catalysed hydroesterification reaction in the context of biodiesel manufacturing Mowla O, Kennedy E, Stockenhuber M |
27 - 35 |
Experimental investigation of efficiency of MEOR process in a carbonate oil reservoir using Alcaligenes faecalis: Impact of interfacial tension reduction and wettability alteration mechanisms Najafi-Marghmaleki A, Kord S, Hashemi A, Motamedi H |
36 - 44 |
The synergistic effect of Ni promoter on Mo-S/CNT catalyst towards hydrodesulfurization and hydrogen evolution reactions Liu SJ, Jin Q, Xu Y, Fang XC, Liu N, Zhang J, Liang X, Chen BH |
45 - 50 |
Improved lipase-catalyzed methanolysis for biodiesel production by combining in-situ removal of by-product glycerol Tian XG, Dai LM, Liu DH, Du W |
51 - 59 |
Catalytic activity of electrodeposited cobalt oxide films for methane combustion in a micro-channel reactor Rodrigues JM, Ribeiro MF, Fernandes EC |
60 - 70 |
Modeling of permeability for ultra-tight coal and shale matrix: A multi-mechanistic flow approach Wang Y, Liu SM, Zhao YX |
71 - 80 |
Adoption of phase behavior tests and negative salinity gradient concept to optimize Daqing oilfield alkaline-surfactant-polymer flooding Chen Z, Han X, Kurnia I, Yu JJ, Zhang GY, Li L |
81 - 89 |
Effects of phenolic hydroxyl functionality on lignin pyrolysis over zeolite catalyst Kim JY, Heo S, Choi JW |
90 - 98 |
Structure of tetrabrachial flames in non-premixed autoigniting dimethyl ether/air mixtures Jin T, Wang XJ, Luo KH, Luo K, Fan JR |
99 - 107 |
Production characteristics of two class water-excess methane hydrate deposits during depressurization Gao Y, Yang MJ, Zheng JN, Chen BB |
108 - 113 |
Rancimat and PetroOxy oxidation stability measurements of rapeseed oil methyl ester stabilized with hydrazides and antioxidants Bar F, Hopf H, Knorr M, Krahl J |
114 - 123 |
Investigation of the effects of gasoline and CNG fuels on a dual sequential ignition engine at low and high load conditions Yontar AA, Dogu Y |
124 - 133 |
Application of sequential extraction and hydrothermal treatment for characterization and enrichment of rare earth elements from coal fly ash Lin RH, Stuckman ML, Howard BH, Bank TL, Roth EA, Macala MK, Lopano C, Soong Y, Granite EJ |
134 - 140 |
Additive influence on ignition of stoichiometric ethylene-air mixture by break sparks Razus D, Movileanu C, Oancea D |
141 - 146 |
Thermal characterization and pyrolysis of digestate for phenol production Wei Y, Hong JJ, Ji WR |
147 - 153 |
The effect of chemical reaction kinetic parameters on the bench-scale pyrolysis of lignocellulosic biomass Ding YM, Ezekoye OA, Zhang JQ, Wang CJ, Lu SX |
154 - 164 |
Comparison of detonation characteristics in energy output of gaseous JP-10 and propylene oxide in air Liu LJ, Zhang Q |
165 - 177 |
Transient mass transfer ahead of a hot solvent chamber in a heavy oil gravity drainage process Wang Q, Chen ZX |
178 - 189 |
Artificial neural network model to predict behavior of biogas production curve from mixed lignocellulosic co-substrates Das Ghatak M, Ghatak A |
190 - 204 |
Integrated fractal description of nanopore structure and its effect on CH4 adsorption on Jharia coals, India Naveen P, Asif M, Ojha K |
205 - 214 |
Performance of synthetic CaO-based sorbent pellets for CO2 capture and kinetic analysis Zhang Y, Gong X, Chen XL, Yin L, Zhang J, Liu WQ |
215 - 224 |
Structure and morphology variation of solid residue from co-liquefaction of lignite and Merey atmospheric residue Yang TF, Qin Y, Meng HS, Deng WA, Li C, Du JT, Niu QS |
225 - 232 |
Flotation behavior of raw and oxidized fine coal when mixed with coarse particles Yang HC, Cai YL, Wu LJ |
233 - 250 |
Experimental study of the combustion and emission characteristics of ethanol, diesel-gasoline, n-heptane-iso-octane, n-heptane-ethanol and decane-ethanol in a constant volume vessel Li RZ, Liu ZC, Han YQ, Tan MZ, Xu Y, Tian J, Yan JY, Meng XK, Wei MZ, Hu SC, Chong DG, Li LL |
251 - 256 |
Effect of particle size on particulate matter emissions during biosolid char combustion under air and oxyfuel conditions Liaw SB, Chen XJ, Yu Y, Costa M, Wu HW |
257 - 266 |
Understanding desorption of oil fractions from mineral surfaces Li XG, Bai Y, Sui H, He L |
267 - 278 |
An integrated experimental approach to quantify the oil recovery potential of seawater and low-salinity seawater injection in North Sea chalk oil reservoirs Seyyedi M, Tagliaferri S, Abatzis J, Nielsen SM |
279 - 289 |
Effects of the variation in diesel fuel components on the particulate matter and unregulated gaseous emissions from a common rail diesel engine Li ZL, Liu GB, Cui XF, Sun XY, Li S, Qian Y, Jiang CX, Lu XC |
290 - 298 |
Effect of silica and clay minerals on rheology of heavy crude oil emulsions Mironova MV, Ilyin SO |
299 - 307 |
Effects of the evolutions of coal properties during nitrogen and MTE drying processes on the spontaneous combustion behavior of Zhaotong lignite Zhang YX, Dong JX, Guo FH, Chen XK, Wu JJ, Miao ZY, Xiao L |
308 - 316 |
Near-nozzle spray dynamics of 6-hole GDI injector under subcooled and superheated conditions Jeon J, Moon S, Sato K, Nagasawa T |
317 - 322 |
Solvent effect of gamma-valerolactone (GVL) on cellulose and biomass hydrolysis in hot-compressed GVL/water mixtures Song B, Yu Y, Wu HW |
323 - 332 |
Investigation of moisture effect on methane adsorption capacity of shale samples Zou J, Rezaee R, Xie Q, You LJ, Liu KQ, Saeedi A |
333 - 340 |
Experimental and kinetic modeling investigation on methyl decanoate pyrolysis at low and atmospheric pressures Zhai YT, Ao CC, Feng BB, Meng QH, Zhang Y, Mei BW, Yang JZ, Liu FY, Zhang LD |
341 - 350 |
A novel method to estimate subsurface shale gas capacities Huang HX, Sun W, Xiong FY, Chen L, Li X, Gao T, Jiang ZX, Ji W, Wu YJ, Han J |
351 - 361 |
Influence of coal moisture on initial gas desorption and gas-release energy characteristics Wang CJ, Yang SQ, Li JH, Li XW, Jiang CL |
362 - 373 |
Modeling investigation of low salinity water injection in sandstones and carbonates: Effect of Na+ and SO42- Esene C, Onalo D, Zendehboudi S, James L, Aborig A, Butt S |
374 - 383 |
Structural transformation of fluid phase extracted from coal matrix during thermoplastic stage of coal pyrolysis Qiu SX, Zhang SF, Wu Y, Qiu GB, Sun CG, Zhang QY, Dang J, Wen LY, Hu ML, Xu J, Zhu RJ, Bai CG |
384 - 394 |
Content of potassium and other aerosol forming elements in commercially available wood pellet batches Pollex A, Zeng T, Khalsa J, Erler U, Schmersahl R, Schon C, Kuptz D, Lenz V, Nelles M |
395 - 404 |
Removal of nitrogen from chicken manure anaerobic digestion for enhanced biomethanization Li K, Liu RH, Yu Q, Ma RJ |
405 - 414 |
Lithotype-based modelling and simulations of coal degradation conditioned by both high and low energy breakage Shi FN, Liu HP, Rodrigues S, Esterle J, Nguyen AK, Manlapig E |
415 - 422 |
Chemical characteristics of filterable and condensable PM2.5 emissions from industrial boilers with five different fuels Yang HH, Arafath SM, Lee KT, Hsieh YS, Han YT |
423 - 430 |
Autoignition studies of Liquefied Natural Gas (LNG) in a shock tube and a rapid compression machine Vallabhuni SK, Lele AD, Patel V, Lucassen A, Moshammer K, AlAbbad M, Farooq A, Fernandes RX |
431 - 443 |
A systematic numerical modeling study of various polymer injection conditions on immiscible and miscible viscous fingering and oil recovery in a five-spot setup Chaudhuri A, Vishnudas R |
444 - 453 |
Experimental study of impact of anisotropy and heterogeneity on gas flow in coal. Part I: Diffusion and adsorption Tan YL, Pan ZJ, Liu JS, Kang JH, Zhou FB, Connell LD, Yang YX |
454 - 462 |
Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture Mohsin HM, Johari K, Shariff AM |
463 - 469 |
Chemical speciation and leaching characteristics of hazardous trace elements in coal and fly ash from coal-fired power plants Zhao SL, Duan YF, Lu JC, Gupta R, Pudasainee D, Liu S, Liu M, Lu JH |
470 - 475 |
Experimental data and prediction of normal boiling points of partial acylglycerols Damaceno DS, Jesus EP, Ceriani R |
476 - 484 |
Sulfur abundant S/FeS2 for efficient removal of mercury from coal-fired power plants Li HL, Zhu WB, Yang JP, Zhang MG, Zhao JX, Qu WQ |
485 - 494 |
Development of oxide-supported nickel-based catalysts for catalytic decomposition of dimethyl sulfide Shimoda N, Koide N, Kasahara M, Mukoyama T, Satokawa S |
495 - 505 |
Characteristics of microscopic pore structure and fractal dimension of bituminous coal by cyclic gas adsorption/desorption: An experimental study Wang ZY, Cheng YP, Zhang KZ, Hao CM, Wang L, Li W, Hu B |
506 - 518 |
Ultrasonic shear wave reflectometry applied to the determination of the shear moduli and viscosity of a viscoelastic bitumen Rabbani A, Schmitt DR |
519 - 529 |
Mineral manipulation of Zhundong lignite towards fouling mitigation in a down-fired combustor Huang Q, Zhang YY, Yao Q, Li SQ |
530 - 542 |
Late Jurassic bituminous shales from Marib oilfields in the Sabatayn Basin (NW Yemen): Geochemical and petrological analyses reveal oil-shale resource Hakimi MH, Al-Matary AM, Hersi OS |
543 - 549 |
An analytical model for pore volume compressibility of reservoir rock Zhu SY, Du ZM, Li CL, You ZJ, Peng XL, Deng P |
550 - 561 |
Combustion process decoupling of a diesel/natural gas dual-fuel engine at low loads Wang ZS, Du GZ, Wang D, Xu Y, Shao MY |
562 - 571 |
Experimental study on the effect of nozzle geometry on string cavitation in real-size optical diesel nozzles and spray characteristics Chen Z, He ZX, Shang WW, Duan L, Zhou H, Guo GM, Guan W |
572 - 580 |
Influence of the temperature in the yield and composition of the bio-oil from the pyrolysis of spent coffee grounds: Characterization by comprehensive two dimensional gas chromatography Primaz CT, Schena T, Lazzari E, Caramao EB, Jacques RA |
581 - 590 |
Stimulation of methanogenic crude oil biodegradation in depleted oil reservoirs Vilcaez J, York J, Youssef N, Elshahed M |
591 - 599 |
Anchoring mechanisms of methane/air premixed flame in a mesoscale diverging combustor with cylindrical flame holder Wan JL, Shang C, Zhao HB |
600 - 609 |
Dew point pressure prediction based on mixed-kernels-function support vector machine in gas-condensate reservoir Zhong Z, Liu SY, Kazemi M, Carr TR |
610 - 619 |
Excellent aging stability of upgraded fast pyrolysis bio-oil in supercritical ethanol Jo H, Verma D, Kim J |
620 - 631 |
Improved estimation of Cetane number of fatty acid methyl esters (FAMEs) based biodiesels using TLBO-NN and PSO-NN models Baghban A, Kardani MN, Mohammadi AH |
632 - 638 |
Investigation on pyrolysis mechanism of guaiacol as lignin model compound at atmospheric pressure Liu CJ, Ye LL, Yuan WH, Zhang Y, Zou JB, Yang JZ, Wang YZ, Qi F, Zhou ZY |
639 - 644 |
Characteristics of Na2CO3-catalyzed water-gas shift reaction under coal liquefaction conditions Li H, You Q, Wu SY, Wu YQ, Huang S, Gao JS |
645 - 652 |
Reaction behaviour of light and heavy components of bio-oil in methanol and in water Wu LP, Hu X, Wang S, Hasan MM, Jiang SJ, Zhang L, Li CZ |
653 - 658 |
Kinetic and thermodynamic of heterogeneously K3PO4/AC-catalysed transesterification via pseudo-first order mechanism and Eyring-Polanyi equation Farid MAA, Hassan MA, Taufiq-Yap YH, Ibrahim ML, Hasan MY, Ali AAM, Othman MR, Shirai Y |
659 - 665 |
Dynamics of methane/air premixed flame in a mesoscale diverging combustor with/without a cylindrical flame holder Wan JL, Shang C, Zhao HB |
666 - 671 |
A new and more precise experiment method for characterizing the mineralogical heterogeneity of unconventional hydrocarbon reservoirs Du SH, Pang S, Shi YM |
672 - 683 |
Catalytic performance of Ni-Cu/Al2O3 for effective syngas production by methanol steam reforming Khzouz M, Gkanas EI, Du SF, Wood J |
684 - 692 |
Interactions of DTPA chelating agent with sandstone rocks during EOR: Rock surface charge study Alarifi SA, Mahmoud MA, Kamal MS |
693 - 703 |
Oxygen release from manganese ores relevant for chemical looping with oxygen uncoupling conditions Sundqvist S, Mattisson T, Leion H, Lyngfelt A |
704 - 711 |
Heavy crude oil upgrading using nanoparticles by applying electromagnetic technique Taheri-Shakib J, Shekarifard A, Naderi H |
712 - 723 |
Chemical Explosive Mode Analysis for a Jet-in-Hot-Coflow burner operating in MILD combustion Cifuentes L, Fooladgar E, Duwig C |
724 - 728 |
Ignition delay time and sooting propensity of a kerosene aviation jet fuel and its derivative blended with a bio-jet fuel Han HS, Kim CJ, Cho CH, Sohn CH, Han J |
729 - 742 |
Effect of hydrogen addition on laminar burning velocity of CH4/DME mixtures by heat flux method and kinetic modeling Wang ZH, Wang SX, Whiddon R, Han XL, He Y, Cen KF |
743 - 754 |
Role of global fuel-air equivalence ratio and preheating on the behaviour of a biogas driven dual fuel diesel engine Sarkar A, Saha UK |
755 - 768 |
Experimental and kinetic studies on laminar flame characteristics of acetone-butanol-ethanol (ABE) and toluene reference fuel (TRF) blends at atmospheric pressure Zhang SF, Lee TH, Wu H, Pei JY, Wu W, Liu FS, Zhang CH |
769 - 779 |
Application of Bound-to-Bound Data Collaboration approach for development and uncertainty quantification of a reduced char combustion model Salvatore Iavarone S, Oreluk J, Smith ST, Hegde A, Li WY, Packard A, Frenklach M, Smith PJ, Contino F, Parente A |
780 - 790 |
Influence of tarry material deposition on low-strength cokes or pyrolyzed chars of low rank coals on the strength Mochizuki Y, Kubota Y, Uebo K, Tsubouchi N |
791 - 802 |
The influence of copper oxide nano particle added pongamia methyl ester biodiesel on the performance, combustion and emission of a diesel engine Perumal V, Ilangkumaran M |
803 - 816 |
Quantification of phase behaviour of solvents-heavy oil/bitumen systems in the presence of water at high pressures and elevated temperatures Chen ZH, Yang DY |
817 - 832 |
Permeability stress-sensitivity in 4D flow-geomechanical coupling of Shouyang CBM reservoir, Qinshui Basin, China Zhu HY, Tang XH, Liu QY, Liu SJ, Zhang BH, Jiang S, McLennan JD |
833 - 844 |
3D CFD simulation of a CI engine converted to SI natural gas operation using the G-equation Liu JL, Dumitrescu CE |
845 - 854 |
A proposed biomass char classification system Lester E, Avila C, Pang CH, Williams O, Perkins J, Gaddipatti S, Tucker G, Barraza JM, Trujillo-Uribe MP, Wu T |