| 1 - 9 |
Adsorption of inhibitors using a CO2-activated sugarcane bagasse fly ash for improving enzymatic hydrolysis and alcoholic fermentation in biorefineries
Freitas JV, Ruotolo LAM, Farinas CS |
| 10 - 22 |
Improvement of CI engine combustion and performance running on ternary blends of higher alcohol (Pentanol and Octanol)/hydrous ethanol/diesel
Nour M, Attia AMA, Nada SA |
| 23 - 29 |
Source of N and O in N2O formation during selective catalytic reduction of NO with NH3 over MnOx/TiO2
Wang DH, Yao Q, Hui SE, Niu YQ |
| 30 - 44 |
Gas sorption and diffusion damages by guar-based fracturing fluid for CBM reservoirs
Huang QM, Liu SM, Wang G, Wu B, Yang Y, Liu Y |
| 45 - 56 |
Differential effects of ultraviolet radiation and oxidative aging on bio-modified binders
Hosseinnezhad S, Zadshir M, Yu XK, Yin HM, Sharma BK, Fini E |
| 57 - 72 |
Hydrophobic dolomite sorbent for oil spill clean-ups: Kinetic modeling and isotherm study
Davoodi SM, Taheran M, Brar SK, Galvez-Cloutier R, Martel R |
| 73 - 81 |
Effect of multiple factors on preformed particle gel placement, dehydration, and plugging performance in partially open fractures
Wang Z, Bai BJ, Sun XD, Wang J |
| 82 - 90 |
Experimental study on methane hydrate formation in a partially saturated sandstone using low-field NMR technique
Ji YK, Hou J, Cui GD, Lu N, Zhao EM, Liu YL, Du QJ |
| 91 - 97 |
One-step preparation of graphitic carbon nitride/Polyaniline/Palladium nanoparticles based nanohybrid composite modified electrode for efficient methanol electro-oxidation
Eswaran M, Dhanusuraman R, Tsai PC, Ponnusamy VK |
| 98 - 105 |
Fuel adhesion characteristics under non-evaporation and evaporation conditions: Part 2-Effect of ambient pressure
Luo HL, Nishida K, Ogata Y |
| 106 - 117 |
Numerical simulation of impinging spray characteristics under high ambient pressures with an improved droplet collision model
Lu Y, Zhao CL, Zhang ZY, Zuo Z, Lv WL |
| 118 - 125 |
Pyrolysis characteristics and non-isothermal torrefaction kinetics of industrial solid wastes
Bach QV, Chen WH, Eng CF, Wang CW, Liang KC, Kuo JY |
| 126 - 135 |
Torrefaction performance prediction approached by torrefaction severity factor
Chen WH, Cheng CL, Show PL, Ong HC |
| 136 - 146 |
Enhancing oil recovery from low-permeability reservoirs with a self-adaptive polymer: A proof-of-concept study
Zhang Y, Feng YJ, Li B, Han PH |
| 147 - 161 |
Residual oil saturation following gas injection in sandstones: Microfluidic quantification of the impact of pore-scale surface roughness
Mehmani A, Kelly S, Torres-Verdin C, Balhoff M |
| 162 - 174 |
Predictions of oxidation and autoignition of large methyl ester with small molecule fuels
Li A, Ji WX, Huang Z, Zhu L |
| 175 - 186 |
Experimental investigation of particle emissions from a Dieseline fuelled compression ignition engine
Zeraati-Rezaei S, Al-Qahtani Y, Herreros JM, Ma X, Xu HM |
| 187 - 217 |
Polymeric and low molecular weight shale inhibitors: A review
Ahmed HM, Kamal MS, Al-Harthi M |
| 218 - 223 |
Coke texture, reactivity and tumbler strength after reaction under simulated blast furnace conditions
Zhang WJ, Shi T, Zhang QF, Cao YP, Qian H, Wu XC, Li J, Zhang Q, Yang GZ, Yang JH |
| 224 - 232 |
Bioelectricity generation and effect studies from organic rich chocolaterie wastewater using continuous upflow anaerobic microbial fuel cell
Subha C, Kavitha S, Abisheka S, Tamilarasan K, Arulazhagan P, Banu JR |
| 233 - 241 |
Synthesis of cyclic carbonate from CO2 and epoxide using bifunctional imidazolium ionic liquid under mild conditions
Yue S, Wang PP, Hao XY |
| 242 - 248 |
In-situ observation of crystallization inside coal slags and influence of crystals on flow behavior
Xuan WW, Wang HN, Xia DH |
| 249 - 259 |
Flame stability and combustion characteristics of liquid fuel in a meso-scale burner with porous media
Chen XJ, Li JW, Feng M, Zhao D, Shi BL, Wang NF |
| 260 - 275 |
Study of surfactant alternating gas injection (SAG) in gas-flooded oil-wet, low permeability carbonate rocks
Ghosh P, Mohanty KK |
| 276 - 284 |
An extended hybrid chemistry framework for complex hydrocarbon fuels
Ranade R, Alqahtani S, Farooq A, Echekki T |
| 285 - 292 |
Biodiesel production using layered double hidroxides and derived mixed oxides: The role of the synthesis conditions and the catalysts properties on biodiesel conversion
Reyna-Villanueva LR, Dias JM, Medellin-Castillo NA, Ocampo-Perez R, Martinez-Rosales JM, Penaflor-Galindo T, Fuentes GA |
| 293 - 306 |
Measurements and modelling of CH4 and CO2 adsorption behaviors on shales: Implication for CO2 enhanced shale gas recovery
Zhou JP, Liu MH, Xian XF, Jiang YD, Liu QL, Wang XC |
| 307 - 315 |
Effects of KCl and CaCl2 on the evolution of anhydro sugars in reaction intermediates during cellulose fast pyrolysis
Leng EW, Costa M, Gong X, Zheng AQ, Liu SJ, Xu MH |
| 316 - 327 |
Fouling and thermal-hydraulic characteristics of aligned elliptical tube and honeycomb circular tube in flue gas heat exchangers
Tang SZ, Li MJ, Wang FL, Liu ZB |
| 328 - 340 |
Promoting "adiabatic core" approximation in a rapid compression machine by an optimized creviced piston design
Wu YT, Yang M, Tang CL, Liu Y, Zhang P, Huang ZH |
| 341 - 351 |
Dynamic porosity and apparent permeability in porous organic matter of shale gas reservoirs
Sheng GL, Javadpour F, Su YL |
| 352 - 367 |
A comprehensive review on thermochemical, biological, biochemical and hybrid conversion methods of bio-derived lignocellulosic molecules into renewable fuels
Kumar G, Dharmaraja J, Arvindnarayan S, Shoban S, Bakonyi P, Saratale GD, Nemestothy N, Belafi-Bako K, Yoon JJ, Kim SH |
| 368 - 382 |
Chemical properties and composition of PM emitted from a diesel engine fueled with ternary fuel (diesel-biodiesel-ethanol) in blended and fumigation modes
Ghadikolaei MA, Yung KF, Cheung CS, Lau PC |
| 383 - 393 |
Mechanism of water inhibiting gas outburst and the field experiment of coal seam infusion promoted by blasting
Yang W, Wang H, Zhuo QY, Lin BQ, Zhang JG, Lu CZ, Lin MH |
| 394 - 403 |
Optical investigations on particles evolution and flame properties during pulverized coal combustion in O-2/N-2 and O-2/CO2 conditions
Wu J, Chen LH, Bengtsson PE, Zhou JW, Zhang JF, Wu XC, Cen KF |
| 404 - 412 |
Enhanced yield of benzene, toulene, and xylene from the co-aromatization of methane and propane over gallium supported on mesoporous ZSM-5 and ZSM-11
Song C, Gim MY, Lim YH, Kim DH |
| 413 - 419 |
Deflagration characteristics of hydrogen-air mixture beyond the original premixed fuel region
Ma QJ, Zhang Q |
| 420 - 427 |
Synergistic enhancement of biohydrogen production from grass fermentation using biochar combined with zero-valent iron nanoparticles
Yang G, Wang JL |
| 428 - 437 |
Applicability of high-pressure direct-injected methane jet for a pure compression-ignition engine operation
Lee TK, Park H, Hyun J, Lee C, Song HH |
| 438 - 446 |
Comparison on the explosivity of coal dust and of its explosion solid residues to assess the severity of re-explosion
Lin S, Liu ZT, Qian JF, Li XL |
| 447 - 457 |
Viscosity of (CH4 + C3H8 + CO2 + N-2) mixtures at temperatures between (243 and 423) K and pressures between (1 and 28) MPa: Experiment and theory
Al Ghafri SZS, McKenna A, Czubinski FF, May EF |
| 458 - 465 |
Mercury adsorption and oxidation over magnetic biochar in oxyfuel combustion atmosphere: Impact of enriched CO2 and H2O
Zhou YM, Zhao YC, Zhang JY, Zheng CG |
| 466 - 473 |
A forward modeling method based on electromagnetic theory to measure the parameters of hydraulic fracture
Zhang LM, Qi J, Li LX, Zhang K, Sun ZX, Yang YF, Luo Q |
| 474 - 481 |
Effect of thermal extraction on hydro-liquefaction property of residual coal
Wang ZC, Wang Q, Hu RN, Pan CX, Wang XL, Ren SB, Lei ZP, Kang SG, Yan JC, Shui HF |
| 482 - 495 |
Numerical study of HCN and NH3 reduction in a two-stage entrained flow gasifier by implementing MILD combustion
Xu MC, Tu YJ, Zhou AQ, Xu HP, Yu WB, Li ZW, Yang WM |
| 496 - 505 |
Investigation of the pyrolysis characteristics of guaiacol lignin using combined Py-GC x GC/TOF-MS and in-situ FTIR
Wang L, Li J, Chen YQ, Yang HP, Shao JG, Zhang XY, Yu HB, Chen HP |
| 506 - 513 |
Flow visualization study of a diffusion flame under acoustic excitation
Fujisawa N, Iwasaki K, Fujisawa K, Yamagata T |
| 514 - 522 |
Ultralow concentration of molybdenum disulfide nanosheets for enhanced oil recovery
Raj I, Qu M, Xiao LZ, Hou JR, Li YF, Liang T, Yang TY, Zhao MD |
| 523 - 533 |
Revisiting asphaltenes instability predictions by probing destabiliztion using a fully immersed quartz crystal resonator
Saidoun M, Palermo T, Passade-Boupat N, Gingras JP, Carrier H, Daridon JL |
| 534 - 542 |
Effects of numerical dispersion on pressure diffusion in CBM reservoirs
Zhu SY, Du ZM, Li CL, You ZJ, Peng XL, Jiang H, Wang CW, Deng P |
| 543 - 550 |
Flotation of low rank coal using dodecane after pretreatment by dielectric barrier discharge (DBD) air plasma
Wang DP, Xu M, He JF, Wang L |
| 551 - 561 |
Effects of pore structure and wettability on methane adsorption capacity of mud rock: Insights from mixture of organic matter and clay minerals
Luo P, Zhong NN, Khan I, Wang XM, Wang HJ, Luo QY, Guo ZP |
| 562 - 571 |
Study on a nitrogen-doped porous carbon from oil sludge for CO2 adsorption
Meng FZ, Gong ZQ, Wang ZB, Fang PW, Li XY |
| 572 - 579 |
Investigation of subbituminous coal and lignite combustion processes in terms of mercury and arsenic removal
Marczak M, Wieronska F, Burmistrz P, Strugala A, Kogut K, Lech S |
| 580 - 592 |
Gasification of lignin-rich residues for the production of biofuels via syngas fermentation: Comparison of gasification technologies
Liakakou ET, Vreugdenhil BJ, Cerone N, Zimbardi F, Pinto F, Andre R, Marques P, Mata R, Girio F |
| 593 - 602 |
Characteristics and speciation of heavy metals in fly ash and FGD gypsum from Chinese coal-fired power plants
Fu B, Liu GJ, Mian MM, Sun M, Wu D |
| 603 - 610 |
Experimental study of pilot-scale CFB gasification: Effect of gasifying agent and coal feeding modes on the gasification performance
Wang XF, Zhu ZP, Wang K, Yu KS, Lyu QG |
| 611 - 628 |
Upgrading biogas to biomethane and liquid CO2: A novel cryogenic process
Yousef AM, El-Maghlany WM, Eldrainy YA, Attia A |
| 629 - 635 |
Co-liquefaction of Xilinguole lignite and lignin in ethanol/water solvents under a cheap iron ore catalyst
Shui HF, Zou DH, Wu HH, He F, Wang XL, Pan CX, Wang ZC, Lei ZP, Ren SB, Kang SG, Xu CC |
| 636 - 643 |
Coal drying study for a direct syngas fired supercritical CO2 cycle integrated with a coal gasification process
Lu XJ, Beauchamp D, Laumb J, Stanislowski J, Swanson M, Dunham D, Martin C |
| 644 - 650 |
Preparation of disk-like alpha-Fe2O3 nanoparticles and their catalytic effect on extra heavy crude oil upgrading
Li FF, Wang XD, Pan H, Li QY, Yang JJ |
| 651 - 659 |
Fate of mercury in two CFB utility boilers with different fueled coals and air pollution control devices
Li XY, Li ZG, Fu CC, Tang L, Chen J, Wu TT, Lin CJ, Feng XB, Fu XW |
| 660 - 668 |
A review on partial hydrogenation of biodiesel and its influence on fuel properties
Adu-Mensah D, Mei DQ, Zuo L, Zhang Q, Wang JF |
| 669 - 682 |
Numerical investigation of liquid and supercritical CO2 flow behaviors through 3D self-affine rough fractures
Li JW, Li Z, Yuan WJ, Lei XM, Torres SAG, Cherubini C, Scheuermann A, Li L |
| 683 - 692 |
Pore-scale simulation of shale oil flow based on pore network model
Yang YF, Wang K, Zhang L, Sun H, Zhang K, Ma JS |
| 693 - 708 |
Pyrolysis of typical MSW components by Py-GC/MS and TG-FTIR
Ma WC, Rajput G, Pan MH, Lin FW, Zhong L, Chen GY |
| 709 - 729 |
Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics
Battistoni M, Som S, Powell CF |
| 730 - 738 |
A numerical study of the heat transfer of an impinging round-jet methane Bunsen flame
Zhen HS, Zhang L, Wei ZL, Chen ZB, Huang ZH |
| 739 - 753 |
Pelletization of wood and alternative residual biomass blends for producing industrial quality pellets
Garcia R, Gil MV, Rubiera F, Pevida C |
| 754 - 762 |
An experimental investigation of nanoemulsion enhanced oil recovery: Use of unconsolidated porous systems
Jalilian M, Tabzar A, Ghasemi V, Mohammadzadeh O, Pourafshary P, Rezaei N, Zendehboudi S |
| 763 - 778 |
Facilitating the transportation of highly viscous oil by aqueous foam injection
Jing JQ, Sun J, Huang HB, Zhang M, Wang CS, Xue XC, Ullmann A, Brauner N |
| 779 - 788 |
The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour
Daley PJ, Williams O, Pang CH, Wu T, Lester E |
| 789 - 799 |
Experimental investigation of biosurfactant mixtures of surfactin produced by Bacillus Subtilis for EOR application
Hadia NJ, Ottenheim C, Li SD, Hua NQ, Stubbs LP, Lau HC |
| 800 - 807 |
Fuel flexible power stations: Utilisation of ash co-products as additives for NOx emissions control
Birley RI, Jones JM, Darvell LI, Williams A, Waldron DJ, Levendis YA, Rokni E, Panahi A |
