| 2651 - 2664 |
A review of studies on CO2 sequestration and caprock integrity
Shukla R, Ranjith P, Haque A, Choi X |
| 2665 - 2672 |
Changes in pore structure of anthracite coal associated with CO2 sequestration process
Liu CJ, Wang GX, Sang SX, Rudolph V |
| 2673 - 2696 |
Liquid penetration length of heptamethylnonane and trimethylpentane under unsteady in-cylinder conditions
Fisher BT, Mueller CJ |
| 2697 - 2702 |
Aqueous-phase catalytic process for production of pentane from furfural over nickel-based catalysts
Zhang XH, Wang TJ, Ma LL, Wu CZ |
| 2703 - 2712 |
In situ diagnostics of Victorian brown coal combustion in O-2/N-2 and O-2/CO2 mixtures in drop-tube furnace
Zhang LA, Binner E, Qiao Y, Li CZ |
| 2713 - 2720 |
Impact of alcohol-gasoline fuel blends on the performance and combustion characteristics of an SI engine
Eyidogan M, Ozsezen AN, Canakci M, Turkcan A |
| 2721 - 2728 |
High energy syngas production by waste tyres steam gasification in a rotary kiln pilot plant. Experimental and numerical investigations
Donatelli A, Iovane P, Molino A |
| 2729 - 2734 |
Bitumen fluxing properties of a new class of sustainable solvents: The isosorbide di-alkyl ethers
Durand M, Mouret A, Molinier V, Feron T, Aubry JM |
| 2735 - 2740 |
Producing biodiesel from high free fatty acids waste cooking oil assisted by radio frequency heating
Liu SY, McDonald T, Wang YF |
| 2741 - 2749 |
Comparison of three accelerated aging procedures to assess bio-oil stability
Hilten RN, Das KC |
| 2750 - 2759 |
Separation of carbon dioxide from flue emissions using Endex principles
Ball R, Sceats MG |
| 2760 - 2768 |
Application of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry to biomarker characterization in Brazilian oils
Aguiar A, Silva AI, Azevedo DA, Neto FRA |
| 2769 - 2774 |
Prediction of deposit formation during combustion of Jatropha oil from standard quality parameters
Kratzeisen M, Muller J |
| 2775 - 2780 |
An empirical approach for predicting kinematic viscosities of biodiesel blends
Krisnangkura K, Sansa-Ard C, Aryusuk K, Lilitchan S, Kittiratanapiboon K |
| 2781 - 2790 |
Investigation of the performance and emissions of bus engine operating on butanol/diesel fuel blends
Rakopoulos DC, Rakopoulos CD, Hountalas DT, Kakaras EC, Giakoumis EG, Papagiannakis RG |
| 2791 - 2801 |
Dynamic modelling and analysis of post-combustion CO2 chemical absorption process for coal-fired power plants
Lawal A, Wang M, Stephenson P, Koumpouras G, Yeung H |
| 2802 - 2814 |
A comprehensive experimental investigation of combustion and heat release characteristics of a biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engine
Gumus M |
| 2815 - 2821 |
Two-step biodiesel production from Jatropha curcas crude oil using SiO2 center dot HF solid catalyst for FFA esterification step
Corro G, Tellez N, Ayala E, Marinez-Ayala A |
| 2822 - 2828 |
Modelling and parameter estimation of ultra-dispersed in situ catalytic upgrading experiments in a batch reactor
Hassanzadeh H, Abedi J |
| 2829 - 2837 |
Pyrolysis oil upgrading by high pressure thermal treatment
Mercader FD, Groeneveld MJ, Kersten SRA, Venderbosch RH, Hogendoorn JA |
| 2838 - 2843 |
Stabilization of water-in-octane nano-emulsion. Part I: Stabilized by mixed surfactant systems
Fu ZS, Liu M, Xu JT, Wang Q, Fan ZQ |
| 2844 - 2852 |
Long term activity of modified ZnO nanoparticles for transesterification
Yan SL, Mohan S, DiMaggio C, Kim M, Ng KYS, Salley SO |
| 2853 - 2863 |
A comparative experimental study of the autoignition characteristics of alternative and conventional jet fuel/oxidizer mixtures
Kumar K, Sung CJ |
| 2864 - 2872 |
Laminar burning velocities of three C3H6O isomers at atmospheric pressure
Burluka AA, Harker M, Osman H, Sheppard CGW, Konnov AA |
| 2873 - 2880 |
Reactions of C-5 and C-6-sugars, cellulose, and lignocellulose under hot compressed water (HCW) in the presence of heterogeneous acid catalysts
Chareonlimkun A, Champreda V, Shotipruk A, Laosiripojana N |
| 2881 - 2890 |
Combustion properties of some power station biomass fuels
Darvell LI, Jones JM, Gudka B, Baxter XC, Saddawi A, Williams A, Malmgren A |
| 2891 - 2896 |
Determination of optimal pre-treatment conditions for ethanol production from olive-pruning debris by simultaneous saccharification and fermentation
Cuevas M, Sanchez S, Bravo V, Garcia JF, Baeza J, Parra C, Freer J |
| 2897 - 2902 |
Dry reforming of coke oven gases over activated carbon to produce syngas for methanol synthesis
Bermudez JM, Fidalgo B, Arenillas A, Menendez JA |
| 2903 - 2917 |
An Eulerian modeling approach of wood gasification in a bubbling fluidized bed reactor using char as bed material
Gerber S, Behrendt F, Oevermann M |
| 2918 - 2924 |
Sorbent attrition in a carbonation/calcination pilot plant for capturing CO2 from flue gases
Gonzalez B, Alonso M, Abanades JC |
| 2925 - 2938 |
Compression ignition engine modifications for straight plant oil fueling in remote contexts: Modification design and short-run testing
Basinger M, Reding T, Williams C, Lackner KS, Modi V |
| 2939 - 2944 |
Biodiesel production from vegetable oil using heterogenous acid and alkali catalyst
Zhang JH, Chen SX, Yang R, Yan YY |
| 2945 - 2952 |
The effect of O-2 enrichment on NOx formation in biomass co-fired pulverised coal combustion
Nimmo W, Daood SS, Gibbs BM |
| 2953 - 2970 |
Fractionation of a coal tar pitch by ultra-filtration, and characterization by size exclusion chromatography, UV-fluorescence and laser desorption-mass spectroscopy
George A, Morgan TJ, Alvarez P, Millan M, Herod AA, Kandiyoti R |
| 2971 - 2976 |
X-ray powder diffraction-based method for the determination of the glass content and mineralogy of coal (co)-combustion fly ashes
Font O, Moreno N, Querol X, Izquierdo M, Alvarez E, Diez S, Elvira J, Antenucci D, Nugteren H, Plana F, Lopez A, Coca P, Pena FG |
| 2977 - 2984 |
Estimation of NOx emissions from coal-fired utility boilers
Chui EH, Gao HN |
| 2985 - 2990 |
Effect of operating pressure, matrix permeability and connate water saturation on performance of CO2 huff-and-puff process in matrix-fracture experimental model
Torabi F, Asghari K |
| 2991 - 3000 |
Co-gasification of coal, plastic waste and wood in a bubbling fluidized bed reactor
Mastellone ML, Zaccariello L, Arena U |
| 3001 - 3011 |
Macroscopic spray characteristics and breakup performance of dimethyl ether (DME) fuel at high fuel temperatures and ambient conditions
Park SH, Kim HJ, Lee CS |
| 3012 - 3021 |
Study of a Chilean petroleum coke fluidized bed combustion fly ash and its potential application in copper, lead and hexavalent chromium removal
Gonzalez A, Moreno N, Navia R, Querol X |
| 3022 - 3032 |
Pyrolysis-gasification of plastics, mixed plastics and real-world plastic waste with and without Ni-Mg-Al catalyst
Wu CF, Williams PT |
| 3033 - 3041 |
Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions
Desantes JM, Payri R, Salvador FJ, De la Morena J |
| 3042 - 3050 |
Characterization and evaluation of fly-ash from co-combustion of lignite and wood pellets for use as cement admixture
Johnson A, Catalan LJJ, Kinrade SD |
| 3051 - 3062 |
Pulverized straw combustion in a low-NOx multifuel burner: Modeling the transition from coal to straw
Mando M, Rosendahl L, Yin C, Sorensen H |
| 3063 - 3068 |
Effect of biomass on temperatures of sintering and initial deformation of lignite ash
Haykiri-Acma H, Yaman S, Kucukbayrak S |
| 3069 - 3077 |
Impact of fuel characteristics on HCCI combustion: Performances and emissions
Starck L, Lecointe B, Forti L, Jeuland N |
| 3078 - 3084 |
Steam gasification reactivity of char from rapid pyrolysis of bio-oil/char slurry
Sakaguchi M, Watkinson AP, Ellis N |
| 3085 - 3092 |
Hydroconversion of sunflower oil on Pd/SAPO-31 catalyst
Kikhtyanin OV, Rubanov AE, Ayupov AB, Echevsky GV |
| 3093 - 3098 |
Biodiesel production in a jet flow stirred reactor
Reyes JF, Malverde PE, Melin PS, De Bruijn JP |
| 3099 - 3105 |
Effects of biodiesel on a DI diesel engine performance, emission and combustion characteristics
Buyukkaya E |
| 3106 - 3113 |
Potential for reducing emissions in a diesel engine by fuelling with conventional biodiesel and Fischer-Tropsch diesel
Lapuerta M, Armas O, Hernandez JJ, Tsolakis A |
| 3114 - 3118 |
Aromatic and aliphatic hydrocarbon balance in electric transformer oils
Kaanagbara L, Inyang HI, Wu J, Hilger H |
| 3119 - 3126 |
Effect of steam addition pathways on NO reduction characteristics in a can-type spray combustor
Furuhata T, Kawata T, Mizukoshi N, Arai M |
| 3127 - 3131 |
Plasma-assisted preparation of Fe-Cu bimetal catalyst for higher alcohols synthesis from carbon monoxide hydrogenation
Zhang H, Chu W, Xu HY, Zhou J |
| 3132 - 3140 |
Rheology of fly ashes from coal and biomass co-combustion
Arvelakis S, Frandsen FJ |
| 3141 - 3146 |
Thermodynamic study of combining chemical looping combustion and combined reforming of propane
Kale GR, Kulkarni BD, Joshi AR |
| 3147 - 3147 |
On the performance of gasolines and alcohol-gasoline blends
Jones JC |
| 3148 - 3148 |
Oxide of nitrogen production in diesel-alcohol blends
Jones JC |
| 3149 - 3149 |
On the EROEI of biogass digestate fuel
Jones JC |
| 3150 - 3150 |
Type K thermocouples in a natural gas furnace
Jones JC |
