| 5439 - 5453 |
A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives
Arbi K, Nedeljkovic M, Zuo YB, Ye G |
| 5454 - 5464 |
Interaction of Hydralazine with Human Serum Albumin and Effect of beta-Cyclodextrin on Binding: Insights from Spectroscopic and Molecular Docking Techniques
Bolattin MB, Nandibewoor ST, Joshi SD, Dixit SR, Chimatadar SA |
| 5465 - 5473 |
Gibbsite Solubility in Hanford Nuclear Waste Approached from above and below Saturation
Reynolds JG, McCoskey JK, Herting DL |
| 5474 - 5483 |
Enhancing the Thermostability of beta-Glucuronidase by Rationally Redesigning the Catalytic Domain Based on Sequence Alignment Strategy
Feng XD, Tang H, Han BJ, Lv B, Li C |
| 5484 - 5499 |
Continuous-Flow Separation of Malaria-Infected Human Erythrocytes Using DC Dielectrophoresis: An Electrokinetic Modeling and Simulation
Nahavandi M |
| 5500 - 5513 |
Comparative Study of Reactive Flash Distillation vs Semibatch Reactor Technologies for the Glycerol Hydrochlorination with Gaseous HCl
de Araujo CA, Eranen K, Mikkola JP, Salmi T |
| 5514 - 5525 |
Reduced Mechanism for Nitrogen and Sulfur Chemistry in Pressurized Flue Gas Systems
Ajdari S, Normann F, Andersson K, Johnsson F |
| 5526 - 5535 |
Application of Inverse Gas Chromatography for Diffusion Measurements and Evaluation of Fluid Catalytic Cracking Catalysts
Wallenstein D, Fougret C, Brandt S, Hartmann U |
| 5536 - 5544 |
Preparation of Al2O3/AlF3-Supported Ruthenium Catalysts for the Hydrogenolysis of Biodiesel-Derived Crude Glycerol
Ahmed TS, Abdelaziz OY, Roberts GW |
| 5545 - 5555 |
Preparation of Superhydrophobic Cu Mesh and Its Application in Rolling-Spheronization Granulation
Jiang W, He J, Mao M, Yuan SJ, Lu HF, Liang B |
| 5556 - 5564 |
Rheological Properties of Viscoelastic Solutions in a Cationic Surfactant-Organic Salts-Water System
Wei XL, Geng PP, Han CH, Guo Y, Chen XX, Zhang JH, Zhang YT, Sun DZ, Zhou SY |
| 5565 - 5573 |
Effects of Catalytic Transesterification and Composition on the Toughness of Poly(lactic acid)/Poly(propylene carbonate) Blends
Zhou LY, Zhao GY, Jiang W |
| 5574 - 5584 |
Polymer Coating over Solid Particles with In Situ Thermal Curing
Zhang SM, So LLC, Faucher S, Xi L |
| 5585 - 5589 |
Novel Coupling of a Capacitive Probe with a Dynamic Vapor Sorption (DVS) Instrument for the Electrostatic Measurements of Powders
Biegaj K, Kwek JW, Lukas T, Rowland M, Heng JYY |
| 5590 - 5597 |
Characterization of Blast Furnace Sludge with Respect to Heavy Metal Distribution
Trinkel V, Mallow O, Aschenbrenner P, Rechberger H, Fellner J |
| 5598 - 5607 |
Mesoporous Alumina with Amidoxime Groups for CO2 Sorption at Ambient and Elevated Temperatures
Gunathilake C, Gangoda M, Jaroniec M |
| 5608 - 5617 |
Effective Removal of Heavy Metals from Aqueous Solutions by Graphene Oxide-Zirconium Phosphate (GO-Zr-P) Nanocomposite
Pourbeyram S |
| 5618 - 5622 |
Exploring the Degradation of Acrylonitrile Butadiene Styrene Resin Certified Reference Material for Heavy Metal Analysis
Ohata M, Hioki A |
| 5623 - 5633 |
New Chemical Reaction Process of a Bi2Te2.7Se0.3 Nanomaterial for Feasible Optimization in Transport Properties Resulting in Predominant n-Type Thermoelectric Performance
Kim C, Kim CE, Baek JY, Kim DH, Kim JT, Ahn JH, Lopez DH, Kim T, Kim H |
| 5634 - 5643 |
Microwave-Assisted Polyol Synthesis of Polymer-Protected Monometallic Nanoparticles Prepared in Batch and Continuous-Flow Processing
Harada M, Cong C |
| 5644 - 5653 |
Implementation of NARMA-L2 Controller for Shell and Tube Heat Exchanger Temperature Process
Paul R, Chokkadi S |
| 5654 - 5669 |
Sequential and Orthogonalized Partial Least-Squares Model Based Real-Time Final Quality Control Strategy for Batch Processes
Jia RD, Mao ZZ, Wang FL, He DK |
| 5670 - 5680 |
Noninvasive Monitoring of a Freeze-Drying Process for tert-Butanol/Water Cosolvent-Based Formulations
Pisano R, Fissore D, Barresi AA |
| 5681 - 5695 |
Integrating Production Control and Scheduling in Multisite Enterprises on the Basis of Real-Time Detection of Divergence
Rathi P, Bhumireddy SM, Nandola NN, Harjunkoski I, Srinivasan R |
| 5696 - 5701 |
Polystyrene Foaming at High Pressure Drop Rates
Tammaro D, Astarita A, Di Maio E, Iannace S |
| 5702 - 5713 |
Control System Design for Furnaces with Multiple Parallel Passes
Ojasvi, Kumar A, Kaistha N |
| 5714 - 5725 |
Integrated Dual-Production Mode Modeling and Multiobjective Optimization of an Industrial Continuous Catalytic Naphtha Reforming Process
Wei M, Yang ML, Qian F, Du WL, Zhong WM |
| 5726 - 5735 |
Development of an Adaptive Experimental Design Method Based on Probability of Achieving a Target Range through Parallel Experiments
Nakao A, Kaneko H, Funatsu K |
| 5736 - 5747 |
Separation of 2-Phenylethanol from Water by Liquid-Liquid Extraction with Ionic Liquids: New Experimental Data and Modeling with Modern Thermodynamic Tools
Domanska U, Paduszynski K, Krolikowsi M, Wroblewska A |
| 5748 - 5762 |
Novel Inverse Supported Ionic Liquid Absorbents for Acidic Gas Removal from Flue Gas
Karousos DS, Kouvelos E, Sapalidis A, Pohako-Esko K, Bahlmann M, Schulz PS, Wasserscheid P, Siranidi E, Vangeli O, Falaras P, Kanellopoulos N, Romanos GE |
| 5763 - 5769 |
Purification of Terpenyl Amine by Reactive Extraction
Schulz R, van den Bongard R, Islam J, Zeiner T |
| 5770 - 5779 |
Influence of Surfactants on Dip Coating of Fibers: Numerical Analysis
Campana DM, Ubal S, Giavedoni MD, Saita FA |
| 5780 - 5787 |
Application of Highly Accurate Phase-Equilibrium Models for CO2 Freezing Prediction of Natural Gas System
Li YJ, Gong CT, Li Y |
| 5788 - 5794 |
Enhancement of NO2-Sensing Performance at Room Temperature by Graphene-Modified Polythiophene
Bai SL, Guo J, Sun JH, Tang PG, Chen AF, Luo RX, Li DQ |
