| 7743 - 7747 |
Recovery of chromium from the solid residue by in-situ-generated hypochlorite
Sozhan G, Mohan S, Vasudevan S, Balaji R, Pushpavanam S |
| 7748 - 7751 |
Syntheses of mesoporous hybrid iron oxophenyl phosphate, iron oxophosphate, and sulfonated oxophenyl phosphate
Mal NK, Bhaumik A, Matsukata M, Fujiwara M |
| 7752 - 7759 |
Model-fitting methods for evaluation of the kinetics triplet during thermal decomposition of poly(ethylene terephthalate) (PET) soft drink bottles
Saha B, Ghoshal AK |
| 7760 - 7766 |
Gas-phase hydrodechlorination of dichloromethane at low concentrations with palladium/carbon catalysts
de Pedro ZM, Gomez-Sainero LM, Gonzalez-Serrano E, Rodriguez JJ |
| 7767 - 7774 |
Kinetics of reduction of nitrotoluenes by H2S-rich aqueous ethanolamine
Maity SK, Pradhan NC, Patwardhan AV |
| 7775 - 7780 |
Bisphenol E decomposition in high-temperature water
Savage PE, Hunter SE, Hoffee KL, Schuelke TJ, Smith MJ |
| 7781 - 7788 |
Thermal conductivity of metakaolin geopolymers used as a first approximation for determining gel interconnectivity
Duxson P, Lukey GC, van Deventer JSJ |
| 7789 - 7794 |
Corrosion behavior of carbon steels in sulfide-containing caustic solutions
Hazlewood PE, Singh PM, Hsieh JS |
| 7795 - 7800 |
Effects of structural differences on metallic corrosion inhibition by metal-polyphosphonate thin films
Demadis KD, Mantzaridis C, Lykoudis P |
| 7801 - 7806 |
Continuous film processing from ultrahigh-molecular-weight polyethylene reactor powder and mechanical property development by melt drawing
Uehara H, Yoshida R, Kakiage M, Yamanobe T, Komoto T |
| 7807 - 7816 |
First-principles, data-based, and hybrid modeling and optimization of an industrial hydrocracking unit
Bhutani N, Rangaiah GP, Ray AK |
| 7817 - 7822 |
Tuning for smooth PID control with acceptable disturbance rejection
Skogestad S |
| 7823 - 7831 |
Computer simulation of bubble-growth phenomena in foaming
Leung SN, Park CB, Xu DL, Li HB, Fenton RG |
| 7832 - 7840 |
Model and parameter uncertainty in distributed systems
Kulkarni K, Zhang LB, Linninger AA |
| 7841 - 7855 |
Pipeline scheduling and inventory management of a multiproduct distribution oil system
Relvas S, Matos HA, Barbosa-Povoa APFD, Fialho J, Pinheiro AS |
| 7856 - 7866 |
Optimization of batch operating policies. Part I. Handling multiple solutions
Garcia-Munoz S, Kourti T, MacGregor JF, Apruzzese F, Champagne M |
| 7867 - 7881 |
Large-scale parameter estimation in low-density polyethylene tubular reactors
Zavala VM, Biegler LT |
| 7882 - 7891 |
Novel dual-membrane gas-liquid contactors: Modelling and concept analysis
Wang SY, Hawboldt K, Abdi MA |
| 7892 - 7896 |
Thiophene capture with complex adsorbent SBA-15/Cu(I)
Dai W, Zhou YP, Li SN, Li W, Su W, Sun Y, Zhou L |
| 7897 - 7904 |
Highly enhanced adsorption of lead ions on chitosan granules functionalized with poly(acrylic acid)
Li N, Bai RB |
| 7905 - 7912 |
Structures and separation properties of PAN-Fe3O4 ultrafiltration membranes prepared under an orthogonal magnetic field
Huang ZQ, Chen ZY, Guo XP, Zhang Z, Guo CL |
| 7913 - 7923 |
Using a multiple-mixing-cell model to study minimum miscibility pressure controlled by thermodynamic equilibrium tie lines
Zhao GB, Adidharma H, Towler B, Radosz M |
| 7924 - 7933 |
Further development of modified UNIFAC (Dortmund): Revision and extension 5
Jakob A, Grensemann H, Lohmann J, Gmehling J |
| 7934 - 7940 |
Natural gas hydrate formation in an ejector loop reactor: Preliminary study
Tang LG, Li XS, Feng ZP, Lin YL, Fan SS |
| 7941 - 7956 |
Identification of diffusion transport properties from desorption/sorption kinetics: An analysis based on a new approximation of fick equation during solid-liquid contact
Vitrac O, Hayert M |
| 7957 - 7966 |
Hot gas filtration and heat exchange in a packed bed using Lapilli as a granular medium
Socorro M, Macias-Machin A, Verona JM, Santana D |
| 7967 - 7976 |
Comprehensive mass transfer model for distillation columns equipped with structured packings
Del Carlo L, Olujic Z, Paglianti A |
