Based on a numerical method introduced by Burger and Karlsen [J. Eng. Math, 41 (2001) 145], a software was developed for the simulation of batch and continuous thickening. The paper recalls the application of the phenomenological theory of sedimentation-consolidation processes to batch settling and continuous thickening of flocculated suspensions. The software presents two alternatives, one for each of these possibilities. For batch thickening, the initial and critical concentration and the height of the initial suspension must be entered together with the parameters of the flux density function and the effective solid stress. The output is a settling plot showing as many lines of constant concentration as requested and a plot of the concentration profile for selected times. For continuous thickening, only the steady state is simulated. The input is the solid feed flux and the required underflow concentration or volume underflow rate. If the thickener area is known, the capacity and the concentration profile in the equipment can be predicted. On the other hand, if the capacity is known, the required settling area and the resulting concentration profiles are predicted. Several examples show the application. (C) 2004 Elsevier B.V. All rights reserved.