One of technologically imminent problems related to the use of pressure sensitive adhesives (PSAs) in the LCD industry is how to properly control the surface properties of various polymeric films used in devices to obtain sufficient bond strength with PSAs. To provide practical solutions to this issue, we used two types of surface treatments, NaOH and corona, to control the surface properties of polymeric films that are widely. used in the LCD industry. Here we report a significant increase in surface tension in triacetyl cellulose (TAC) and discotic liquid crystal (D-LC) films along with a remarkable enhancement of bond strength in TAC/PSA and D-LC/PSA systems. The major portion of surface tension increase, in both types of films, was found to be due to an increase of polar component. The continuous increase of -OH functionality in TAC with NaOH treatment time supported this observation. Furthermore, we established a map of surface treatment by studying the sequential effects of the two treatments, and based on this, we clearly demonstrated that each treatment had its own limiting value that could not be altered regardless of the sequence of surface treatment.