The effects of atmospheric air-plasma treatments on woven and non-woven polyester (PET) textile structures were studied by surface analysis methods: wettability and capillarity methods, as well as atomic force microscopy/lateral force microscopy (AFM/LFM). The water contact angle on plasma-treated PET decreased from 80 degrees to 50-40 degrees, indicating an increase in the surface energy of PET fibres due to a change in the fiber surface chemical nature, which was confirmed by a higher fiber friction force measured by the LFM. The extent of water contact angle decrease, as well as the wash fastness of the treatment varied with the structure of the textile. Indeed the more porous the textile structure is (such as a non-woven), the fewer are the chain scissions of the PET at the fiber surface, during the plasma treatment. Thus, the level of surface oxidation and the weak boundary layers formation depend not only on plasma treatment parameters but also on the textile structure.