A light oil (API 30 degrees) reservoir is an excellent candidate for high pressure air injection, but the oil is not believed to be capable of self-ignition at the reservoir temperature. Several chemical additives and catalysts are studied to evaluate their effectiveness of ignition improvement for this light oil sample. Pressurized Differential Scanning Calorimetry (PDSC) and Accelerating Rate Calorimetry (ARC) experiments are examined in this study. The oil sample, which is mixed with certain catalysts and chemical additives, is subjected to a controlled heating schedule under a constant flow rate of air at 4.14 MPa (600 psig) and 13.8 MPa (2,000 psig) pressure for the PDSC and ARC tests, respectively. The amount and rate of heat released by the oxidation reactions is analyzed for those tests. In the presence of a metallic catalyst and chemical initiators, oxidation behaviour of the oil tested is dramatically improved. Also observed are a significant reduction in the onset temperature of significant exotherm and an increased rate for the release of heat.