Materials Research Bulletin, Vol.39, No.14-15, 2193-2201, 2004
Preparation and characterization of tin diselenide thin film by spray pyrolysis technique
Tin diselenide (SnSe2) thin film is deposited on to non-conducting glass substrate by spray pyrolysis technique at an optimized substrate temperature of 523 K. Hot probe method is used to identify the type of conductivity of the film to be an n-type semiconductor. X-ray diffraction study reveals the polycrystalline nature of the film with a preferential orientation growth. Spherical shaped grains with an average diameter of 233 nm are observed from the SEM photograph. The elemental composition on the surface of the film is analyzed with EDAX spectrum and formed almost in stoichiometric in composition. Room temperature resistivity of 1.27 x 10(4) Omega cm is determined using the linear four-probe method. Activation energy of 0.058 eV is determined by studying the variation of resistivity of the film with temperature. Optical absorption spectrum of this sprayed SnSe2 thin film is analyzed and found to have a direct allowed transition with a band gap of 1.48 eV. (C) 2004 Elsevier Ltd. All rights reserved.
Keywords:thin films