Steady-state population balance models have been developed for a continuous flow gas phase olefin polymerization process with both uniform sized and log-normally size distributed high activity catalyst feeds. For the calculation of polymer properties such as molecular weight averages and weight fraction of comonomers in the copolymer, a multigrain solid core model was used with an assumption that intraparticle monomer mass transfer resistance is negligibly small. The multigrain solid core model was incorporated into the population balance model and the effects of feed catalyst particle size distribution and catalyst deactivation parameters on the polymer production rate, polymer particle size distribution, and polymer properties were investigated. It is observed for deactivating catalyst that the polymer particle size distribution tends to be narrower with a reduced amount of large polymer particles. For the catalyst with nonuniform site deactivation, polymer particles of different sizes exhibit different molecular weight and copolymer composition.