Jute fiber was grafted by acrylonitrile and methylmethacrylate monomers in raw and bleached condition. It was also noted that optimum grafting takes place after about 4 h of grafting. It was also noted that in bleached jute fiber, the grafting percentage is higher at all stages of grafting but the tenacity value at the highest add-on is practically the same as that of raw fiber with much less add-on. The crystalline orientation of the grafted jute fiber was correlated with the fiber tenacity. The moisture regain (%) of the fiber after grafting showed a decreasing trend with an increase in grafting percentage. No structural change of the fiber occurred due to grafting.