Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste. (C) 2010 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.