Doped indium tin oxide (ITO) samples of a surface area around 60 m(2)/g have been synthesized. As doping component platinum and gold atoms were utilized, respectively. The powders were produced by pyrolyzing mixed metal oxide precursors in a first zone in a flame consisting of hydrogen and air, metering a noble metal compound and reducing gas into a second zone of the flame and separating off the solid obtained in a third zone. Well-defined solid phases In2Pt and In2Au in ITO were obtained, respectively. The production of a mixture with discrete SnO2 entities could be avoided. The mixed oxide powder doped with platinum can be used as a catalyst. The structure and composition of materials obtained at different levels of platinum dosing into a flame reactor has been deter-mined. The size of the noble metal-containing entities ranged at about 3.5-5.5 nm. The catalytic properties of these oxides containing noble metal have been utilized in the fabrication of dye-sensitized solar cells (DSCs). Long term stability of DSCs containing liquid electrolytes requires a glass scaling of the two electrodes at a temperature of over 600 degrees C. Such high temperatures are detrimental to the catalytic activity of the conventional platinum layers in the counter electrode. Improved catalytic activity could be achieved by platinum entities bound to indium tin oxide. This catalytic material can effectively be used in the DSCs with glass sealing, the sealing temperature being over 600 degrees C. Spray pyrolysis in a flame reactor is highly suitable to produce noble metal-containing oxides in one single production step. Platinum-containing ITO particles from flame pyrolysis production exhibit superior catalytic activity in dye-sensitized solar cells compared to material from conventional thermal decomposition. (c) 2006 Elsevier B.V. All rights reserved.