Building Integrated Photovoltaics (BIPVs) is one of the most promising applications for Photovoltaics (PVs). However, when the temperature in the BIPV increases, the conversion efficiency deteriorates. A PV/PCM system using Phase Change Materials (PCM) for BIPV thermal control has been experimentally and numerically studied previously. One of the main barriers for this application is how to improve the low thermal conductivity of the PCM in order to achieve a quick thermal dissipation response with longer thermal regulation in PVs. Although the metal fins inserted inside the PCM can improve the heat transfer, the thermal regulation period declines as the volume of the PCM is substituted by the metal mass of the PV/PCM system. A modified PV/PCM system integrated with two PCMs with different phase transient temperatures for improving the heat regulation needs to be investigated. The use of combinations of PCMs, each with a set of different phase transient temperatures, is expected to enhance the thermal regulation effect of the PV/PCM system and lengthen the thermal regulation time in PVs. In this study a developed PV/PCM numerical simulation model for single PCM application has been modified to predict the thermal performance of the multi-PCMs in a triangular cell in the PV/PCM system. A series of numerical simulations tests have been carried out in static state and realistic conditions in UK. The thermal regulation of the PV/PCM system with a different range of phase transient temperature PCMs has been discussed. (C) 2010 Elsevier B.V. All rights reserved.