Some experimental results on the electrophoretic deposition of conjugated polymer are reported. The scanning electron micrographs clearly indicate that the the morphology of filmsof a fluorene-based polymer PDOF-MEHPV by the electrophoretic deposition strongly depends on the toluene/acetonitrile ratio of the parent suspensions. It is also shown that the suspension prepared from a 0.1 g/l toluene solution of the polymer, can give flat and dense polymer films with a thickness in the order of 100 nm by using the electrophoretic deposition. The electrical current originating from the movement of colloial particles has been measured for the suspensions containing polymer more than 0.2 g/l. However. the current due to impurities in the solvent makes it difficult to detect the electrical current corresponding to the particle movement in the suspensions containing smaller amount of the polymer. Polymer light-emitting devices having PDOF-MEHPV films with various thickness prepared by electrophoretic deposition have also been demonstrated. (C) 2009 Elsevier B.V. All rights reserved.