Sr0.75Ba0.25Nb2O6 (SBN75) thin films were deposited on silicon substrate with MgO (100) or TiN (100) buffer layer by radio-frequency magnetron sputtering technique. X-ray diffraction confirmed that a 900 degrees C annealed SBN self-buffer layer introduced before SBN deposition can lead to the highly c-axis orientation of SBN75 thin film on MgO buffer layer. Energy-dispersive spectrometry analysis showed that the SBN75 films had target-film composition transfer and the TiN buffer layer was partially oxidized during SBN growth. The refractive index of SBN films on both MgO/Si and TiN/Si substrates was determined by fitting the measured reflectance curves with Sellmeier dispersion model in the visible region and the micro-structures were studied by scanning electron microscopy. In this paper, the conditions for SBN/MgO/Si treated as waveguide structure were also discussed. (C) 2011 Elsevier B.V. All rights reserved.