The mechanical properties of blends of isotactic polypropylene and high-density polyethylene with a postconsumer resin (recycled dairy containers) were investigated over the entire composition range. Modification of these blends with an ethylene/propylene/diene copolymer or an ethylene/vinyl acetate copolymer was also investigated. Isotactic polypropylene/postconsumer resin blends have satisfactory impact and tensile properties at postconsumer resin contents of less than 50% for certain applications. At higher postconsumer resin contents, the tensile properties were adversely affected. The impact properties remained satisfactory. Addition of an ethylene/propylene/diene copolymer improved the mechanical properties of these blends to levels equal to or greater than those for neat isotactic polypropylene. Ethylene/vinyl acetate copolymers were also able to improve the mechanical properties, but not as efficiently as did the ethylene/propylene/diene copolymer. Blends of high-density polyethylene and a postconsumer resin had poor impact and tensile properties. Although the ethylene/propylene/diene copolymer and ethylene/vinyl acetate copolymers were able to improve these properties, the improvement was insufficient for general recycling, except at lower (less than or equal to 25%) postconsumer resin contents.