화학공학소재연구정보센터
Biomacromolecules, Vol.13, No.9, 2997-3003, 2012
Cells (MC3T3-E1)-Laden Alginate Scaffolds Fabricated by a Modified Solid-Freeform Fabrication Process Supplemented with an Aerosol Spraying
In this study, we propose a new cell encapsulation method consisting of a dispensing method and an aerosol-spraying method. The aerosol spray using a cross-linking agent, calcium chloride (CaCl2), was used to control the surface gelation of dispensed alginate struts during dispensing. To show the feasibility of the method, we used preosteoblast (MC3T3-E1) cells. By changing the relationship between the various dispensing/aerosol-spraying conditions and cell viability, we could determine the optimal cell-dispensing process: a nozzle size (240 pm) and an aerosol spray flow rate (0.93 +/- 0.12 mL min(-1)), 10 mm s(-1) nozzle moving speed, a 10 wt % concentration of CaCl2 in the aerosol solution, and 2 wt % concentration of CaCl2 in the second cross-linking process. Based on these optimized process conditions, we successfully fabricated a three-dimensional, pore-structured, cell-laden alginate scaffold of 20 X 20 x 4.6 mm(3) and 84% cell viability. During long cell culture periods (16, 25, 33, and 45 days), the preosteoblasts in the alginate scaffold survived and proliferated well.