Materials Chemistry and Physics, Vol.135, No.2-3, 287-292, 2012
Characterization of the ZnS thin film buffer layer for Cu(In, Ga)Se-2 solar cells deposited by chemical bath deposition process with different solution concentrations
ZnS buffer layer thin films for Cu(In,Ga)Se-2 (CIGS) have been prepared by chemical bath deposition (CBD) technique onto the ITO coated glasses at 80 degrees C bath temperature, using zinc sulfate hepta-hydrate (ZnSO4 center dot 7H(2)O), thiourea (SC(NH2)(2)) and ammonia (NH4OH) as reacting chemicals. The concentrations of thiourea and ammonia were varied while the concentration of ZnSO4 was immobilized at 0.03 M. The thickness, transmittance, morphology of ZnS films were measured and the band gap was calculated according to the equation related with the absorption coefficient. Through the analysis of the parameters, we could conclude that the physical and optical properties of different ZnS thin films were influenced severely by the concentration of the two reacting chemicals and then the optimal concentration group of SC(NH2)(2) and NH4OH solutions can come to 0.3 M and 1.5 M, respectively. Crown Copyright (C) 2012 Published by Elsevier B.V. All rights reserved.
Keywords:ZnS thin films;Chemical bath deposition (CBD);Cu(In Ga)Se-2 solar cell;Solution concentration;Band gap;Optical properties