화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of the Korean Industrial and Engineering Chemistry, Vol.2, No.4, 301-310, December, 1991
Export Citation
에폭시 수지의 물성 향상을 위한 최근 동향
Recent Trend for Performance Improvement of Epoxy Resin
장정식
초록
대표적인 열가소성 수지인 에폭시 수지는 그 용도 및 응용분야가 광범위하지만, 경화 후 수지의 brittleness 와 고온 및 습윤하에서 물성이 좋지 않아 시용에 제한을 받고 있다. 본고에서는 수지의 최대결점인 brittleness 개선과 고온 습윤 특성의 향상 방법에 대해 고찰하였다. Brittleness 개선 방법으로는 rubber 및 열가소성 수지를 에폭시 수지에 도입하여, 이에 따른 toughness 향상 정도를 중점적으로 다루었으며, 고온 습윤 특성을 향상시키기 위해 에폭시 수지의 molecular design 및 열가소성 수지의 응용방법에 대해 기술하였다.
Epoxy resins have been widely used for many applications along with good processibility. However, epoxy resin systems have poor hot/wet performance properties and brittleness after resin curing and have limited to apply for environmental resistant materials. In order to improve the toughness of epoxy resin, this review article deals with incorporation method of rubber and high performance thermoplastics into the matrix resin. In addition, molecular design of epoxy resin and modification of thermoplastic have been introduced for improving hot/wet properties of epoxy resin.
  1. Bauer RS, "Epoxy Resin Chemistry I," American Chemical Society, Washington, D.C. (1979)
  2. Bauer RS, "Epoxy Resin Chemistry II," American Chemical Society, Washington, D.C. (1983)
  3. Tanaka M, "Epoxy Resins Chemistry and Technology," Marcel Dekker, Inc., New York and Basel (1983)
  4. Lubin G, "Handbook of Composite," pp. 57-58, Van Nostrand Reinhold Company, New York (1984)
  5. May CA, "Epoxy Resin Chemistry and Technology," Ed. C.A. May, Marcel Dekker, Inc., New York and Basel, pp. 1-8 (1988)
  6. U.S. Tariff Commission, Synthetic Organic Chemicals: U.S. Production and Sales of Plastics and Resin Materials
  7. Modern Plastics, January Issue (1968-1984)
  8. Stenzenberger HD, Romer W, Modern Plastics, 34th, May 8-11, 899 (1989)
  9. Browning CE, Polym. Eng. Sci., 18, 16 (1978) 
  10. McKague EL, Reynold JD, Haskin JE, J. Appl. Polym. Sci., 22, 1643 (1978) 
  11. Apicella A, Nicolais L, Astarita G, Drioli E, Polymer, 20(9), 1143 (1979) 
  12. Mijovic J, Kim J, Slaby J, J. Appl. Polym. Sci., 29, 144 (1984)
  13. Yee AF, Pearson RA, "Toughening Mechanism in Elastomer Modified Epoxy Resins," NASACR-3718 (1983)
  14. Yee AF, Pearson RA, "Toughening Mechanism in Elastomer Modified Epoxy Resins," NASACR-3852 (1984)
  15. Kirshenbaum SL, Garzit S, Bell JP, American Chemical Society (1984)
  16. Pocius AV, Schultz WJ, Adam RE, Proc. Adhesion Soc. Adhesion Soc., p. 4, Hilton Head (1986)
  17. Manzione LT, Gillham JK, J. Appl. Polym. Sci., 26, 889 (1981) 
  18. Manzione LT, Gillham JK, J. Appl. Polym. Sci., 26, 907 (1981) 
  19. Nae HN, Reich S, Nir Z, "Rubber-Modified Thermoset Resins," American Chemical Society, 218 (1984)
  20. Bauer RS, 18th International SAMPE Technical Conference, October 7-9, pp. 510-519 (1986)
  21. Chan LC, Gillham JK, Kinloch AJ, Shaw SJ, "Rubber-Modified Thermoset Resins," American Chemical Society, p. 261 (1984)
  22. Henry S, Hsich Y, 34th International SAMPE Symposium May 8-11, 884 (1989)
  23. Younhing H, Huigong W, Xiping Z, 34th International SAMPE Symposium May 8-11, 875 (1989)
  24. Riley BL, V 8/GR, MK 5 Air Frame Composite Application, in Proceedings of the Second International Conference on Fiber Reinforced Composites, Inst. of Mech. Eng., Publication C 33/86, p. 153 (1986)
  25. Poveromo L, "Polyimides," K.L. Mittel Ed., Plenum Press, New York & London, Vol. 2, p. 1103 (1984)
  26. Rayhava RS, 28th National SAMPE Conference 28, 367 (1983)
  27. Selton MS, McGrail PT, Peacock JA, Wilknson SP, Crick RA, Davies M, Almen G, 19th International SAMPE Technical Conference, 19, 700 (1987)
  28. Shimp DA, Hudock FA, Boho WS, 18th International SAMPE Technical Conference, 18, 851 (1986)
  29. Steiner P, Browne JM, Blain MT, McKillen JM, 18th International SAMPE Technical Conference, 18, 851 (1986)
  30. Stenzenberger HD, Konig P, Herzog M, Romer W, Pierce S, Canning M, 32nd International SAMPE Symposium, 32, 44 (1987)
  31. Bauer RS, Filippov AG, Schlaudt LM, Breitigam WV, The Processings of 32nd International SAMPE Symposium, April 6-9, pp. 1104-1113 (1987)
  32. Bauer RS, Filippov AG, Schlaudt LM, Breitigam WV, The Processings of 33rd International SAMPE Symposium, March 7-10, pp. 1385-1393 (1988)
  33. Bauer RS, The Proceedings of 34th International SAMPE Symposium, May 7-11, pp. 1889-1990 (1989)
  34. Schlaudt LM, Bauer RS, Blackburn CA, The Proceedings of 34th International SAMPE Symposium, May 8-11, pp. 917-928 (1989)
  35. McGary FJ, Proc. Soc. Lond. A, 319, 59 (1970)
  36. Kunz SC, Beaumont PW, J. Mater. Sci., 16, 1431 (1981) 
  37. Bucknall CB, "Toughened Plastics," London, Applied Science (1977)
  38. Yee AF, Pearson RA, General Electric Co. NASA Contractor Report 3718 (1983)
  39. Kunz-Douglass SC, Beaumont PWR, Ashby MF, J. Mater. Sci., 15, 1109 (1980) 
  40. Bucknall CB, Yoshi T, Br. Polym. J., 10, 53 (1978)
  41. Manzoine LT, Gillham JK, McPherson CA, J. Appl. Polym. Sci., 26, 889 (1981) 
  42. Manzoine LT, Gillham JK, McPherson CA, J. Appl. Polym. Sci., 26, 907 (1981) 
  43. Kinloch AJ, Shaw SJ, Tod DA, Hunston DL, Polymer, 24, 1341 (1983) 
  44. Kinloch AJ, Shaw SJ, Tod DA, Hunston DL, Polymer, 24, 1355 (1983) 
  45. Siebert AR, Riew CK, Paper Presented at the 161st ACS Meeting, Org. Coat. Plast. Div., Los Angeles, Cal. (1971)
  46. Rowe EH, Siebert AR, Drake RS, Modern Plast., 47, 110 (1970)
  47. Meeks SC, Polymer, 15, 675 (1984) 
  48. Riew CK, Rowe EH, Siebert AR, Toughness and Brittleness of Plastics, ACS Adv. in Chem. Ser., 154:326 (1976)
  49. Ting RY, "Epoxy Resins," C.A. May, Ed., Marcel Dekker, Inc., pp. 551-651 (1988)
  50. Riew CK, Rubber Chem. Technol., 54, 374 (1981)
  51. Sultan TN, McGarry FJ, Polym. Eng. Sci., 13, 29 (1973) 
  52. Romanchik WA, Sohn JFG, Am. Chem. Soc. Symp. Ser., 221, 85 (1982)
  53. Kinloch AJ, Shaw SJ, Tod DA, Huston DL, Polymer, 24, 1341 (1985) 
  54. Okamoto A, Polym. Eng. Sci., 23, 222 (1983) 
  55. Yorkgitis EM, Eiss NS, "Epoxy Resins and Composites I," K. Dusek, Ed., Springer-Verlag, Berlin, pp. 79-109 (1986)
  56. Yorkgitis EM, Ph.D. Thesis, Virginia Polytechnic Inst. & State Univ., Blacksburg (1985)
  57. Lee W, "A Study on New Tetrafunctional Epoxy Resin for Advanced Composite," Ph.D. Dissertation, Seoul National University (1991)