The effects of processing using a scraped surface heat exchanger (SSHE) before and after adding unsaturated monoglyceride (UM) on blends of fully hydrogenated soybean oil (FHSO) and soybean oil (SO) were studied. Mixtures of 40:60 and 45:55 FHSO:SO were melted at 80 degrees C for 30 min and crystallized statically or in the SSHE (shear rate of 25 s(-1)) at a cooling rate of 9 degrees C/min. Upon shearing and UM addition, polymorphic transformations toward more (beta) or less (beta') stable forms were governed by the combination between system concentration, composition, and crystallization conditions, as determined by differential scanning calorimetry and powder X-ray diffraction. Nuclear magnetic resonance was used to measure the solid fat content (SFC) development which showed to increase with processing conditions due to the high nucleation rate induced. Processing conditions greatly affected the nano- and microcrystalline structures which were characterized by polarized light microscopy (PLM), cryogenic transmission electron microscopy (Cryo- TEM), and Scherrer analysis of the powder X-ray diffraction data. Crystallization under shear promoted the longitudinal growth of the nanoplatelets; nevertheless, meso structural elements showed a decrease in their dimensions under the same crystallization conditions. The relative oil loss determined gravimetrically was inversely related to the elastic modulus and yield stress of the sheared fat blends, and values were closer to the desirable usability ranges for bakery applications. Our results suggest that fully hydrogenated fats can be functionalized by crystallization in a SSHE and/or by judicious addition of an unsaturated emulsifier.