Extraction of bromelain from pineapple fruit in an aqueous two phase system (ATPS) composed of polyethylene glycol (PEG) 1500 and potassium phosphate has been studied using response surface methodology. The various process variables such as PEG, potassium phosphate and NaCl concentration, and pH were optimized using a central composite rotatable design (CCRD) of response surface methodology (RSM) based on the partition coefficient, % yield, and purification factor of an enzyme. An optimized ATPS composed of 14% (w/w) PEG 1500, 17.66% (w/w) potassium phosphate and 1mM sodium chloride at pH 7.5 was used to purify bromelain from a pineapple fruit. With this system, a maximum enzyme partition coefficient of 12.62 and % yield of 90.33 in the top PEG-rich phase with a purification factor of 2.4 was predicted. The enzyme partition coefficient, % yield, and purification factor obtained from experimentation are 12.22, 89.65, and 2.8, respectively, in the top PEG phase. The response model is validated by the closeness between the predicted and experimental results.