Supercritical fluid extraction (SFE) was used to extract three isoflavonoids including irigenin, irisfloretin and dichtomitin from Belamcanda chinensis (L.) DC. The parameters including pressure, temperature, sample particle size, and flow rate of CO2 were optimized with an orthogonal test. Under the optimized conditions of 15 MPa, 55 degrees C, a sample particle size of 20-40 mesh and CO2 flow rate of 40L h(-1). The process was then scaled up by 10 times using a preparative SFE system. The yield of the crude extract from SFE was 4.1%, which contained irigenin, irisfloretin, and dichtomitin 0.71%, 0.49%, and 0.05%, respectively. To compare the extraction methods, Soxhlet Extraction (SE) was performed. The results indicated that SFE was better than SE. Irigenin, irisfloretin, and dichtomitin in the SFE extract were then separated and purified by high-speed counter-current chromatography (HSCCC) with a two-phase solvent system composed of petroleum ether-ethyl acetate-methanol-water (2:4:3:3, v/v). From 5.0 g of dry crude extract, 27.8 mg irigenin, 16.4 mg irisfloretin, and 2.1 mg dichtomitin were obtained at purities of 97.1%, 96.4%, and 98.0%, respectively, as determined by HPLC-PDA. These results well indicate that SFE and HSCCC are very powerful techniques for the extraction and purification of irigenin, irisfloretin, and dichtomitin from B. chinensis.