To improve interfacial adhesion between hydrophilic cellulose fiber and hydrophobic polymer matrix, ramie fibers were pretreated with isopropanol and n-butanol and then plasma treated using an atmospheric pressure plasma apparatus. For the plasma-treated fibers, the scanning electron microscopy shows increased surface roughness and the X-ray photoelectron spectroscopy analysis shows a significant increase of CC bond in isopropanol-pretreated group, whereas for n-butanol-pretreated group the raise of C=O bonds is most noticeable. For both alcohol-pretreated and plasma-treated groups, the water contact angles increase significantly. Microbond pull-out test shows interfacial shear strengths of fiber/polypropylene (PP) samples increase by 47 and 34%, respectively, for the two groups compared with the control. Therefore, it can be concluded that the reaction between both alcohols and cellulose induced by plasma can indeed create a fiber surface with increased roughness and decreased polarity, and thus is more compatible to PP.