Erythrosine B is extensively used in the textile and food industry. It is reported to be a neurotoxicant and is carcinogenic in nature. It can induce DNA damage in the gastrointestinal organs even at low doses. In this study, adsorption efficiency of montmorillonite (MMT) has been investigated for the removal of erythrosine B (EB) from aqueous solution. The batch adsorption model was developed to predict the equilibrium adsorption capacity with respect to the pH of the dye solution, contact time, initial dye concentration, and adsorbent dosage. A maximum monolayer adsorption capacity of 578.03mg/g was obtained at the original pH (7.5) of the aqueous dye solution within 5 minutes of contact time. It was found that the Langmuir adsorption isotherm yielded the most favorable representation of the adsorption behavior of EB. The dye was found to be chemisorbed on the adsorbent as confirmed by the FTIR spectral analysis. Although anionic in nature, the dye was found to be intercalated into the clay interlayers as suggested by the X-ray diffraction studies.