화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Journal of Industrial and Engineering Chemistry, Vol.19, No.5, 1549-1559, September, 2013
DOI10.1016/j.jiec.2013.01.022  Export Citation
Co-pyrolysis of petroleum based waste HDPE, poly-lactic-acid biopolymer and organic waste
N. Miskolczi†
  • Chemical Engineering and Process Engineering Institute, University of Pannonia, Veszpre´m, 10 Egyetem u., 8200, Hungary
E-mail:
Waste pyrolysis is widely investigated, but less information is available about their co-pyrolysis. The present paper discloses the waste pyrolysis and co-pyrolysis in batch reactor at 400 ℃, 450 ℃ and 500 ℃. The effect of the raw materials and temperature to the product was investigated. Product yield was increased and the quality (composition, contaminants, etc.) improved by co-pyrolysis. Gas and pyrolysis oil yields increased as function of temperature. Higher ratio of organic waste/petroleum based plastic waste resulted in lower yields of volatile hydrocarbons. Concentrations of oxygen containing products and contaminants are significantly changed with temperature or adding of HDPE into raw materials.
Keywords:Biopolymer;Pyrolytic-oil;Organic waste;Oxygenated products;Contaminants
  1. Andrade M, Parra JB, Haro M, Mestre AS, Carvalho AP, Ania CO, Journal of Analytical and Applied Pyrolysis., 95, 31 (2012)
  2. Hall WJ, Miskolczi N, Onwudili J, Williams PT, Energy Fuels, 22(3), 1691 (2008)
  3. Karaduman A, Simsek EH, C¸ic¸ek B, Bilgesu AY, Journal of Analytical and Applied Pyrolysis., 60, 179 (2001)
  4. Pattiya A, Bioresour. Technol., 102(2), 1959 (2011)
  5. Ates F, Putun E, Putun AE, Journal of Analytical and Applied Pyrolysis., 71, 779 (2004)
  6. Sarkar S, Kumar A, Bioresour. Technol., 101(19), 7350 (2010)
  7. Mastral JF, Berrueco C, Ceamanos J, Energy Fuels, 20(4), 1365 (2006)
  8. Yu WJ, Tang Y, Mo LY, Chen P, Lou H, Zheng XM, Bioresour. Technol., 102(17), 8241 (2011)
  9. Wu C, Williams PT, International Journal of Hydrogen Energy., 35, 949 (2010)
  10. Kim SW, Koo BS, Ryu JW, Lee JS, Kim CJ, Lee DH, Kim GR, Choi S, Fuel Processing Technology., 108, 118 (2013)
  11. Shie JL, Chang CC, Chang CY, Tzeng CC, Wu CY, Lin KL, Tseng JY, Yuan MH, Li HY, Kuo CH, Yu YJ, Chang LC, Bioresour. Technol., 102(23), 11011 (2011)
  12. Thangalazhy-Gopakumar S, Adhikari S, Gupta RB, Tu MB, Taylor S, Bioresour. Technol., 102(12), 6742 (2011)
  13. Kissin YV, J. Catal., 180(1), 101 (1998)
  14. Boronat A, Corma A, Appl. Catal. A: Gen., 336(1-2), 2 (2008)
  15. Li XF, Shen BJ, Guo QX, Gao JS, Catal. Today, 125(3-4), 270 (2007)
  16. Oasmaa A, Kuoppala E, Energy Fuels, 17(4), 1075 (2003)
  17. Putun AE, Apaydin E, Putun E, Energy, 29(12-15), 2171 (2004)
  18. Peng J, Chen P, Lou H, Zheng XM, Bioresour. Technol., 100(13), 3415 (2009)
  19. Zhao H, Yan H, Liu M, Zhang C, Quin S, Chinese Journal of Oceanology and Limnology., 29, 996 (2011)
  20. O¨ nal E, Uzun BB, Pu¨ tu¨ n AE, Fuel Processing Technology., 104, 365 (2012)
  21. Ozlem S, Iskin B, Yilmaz G, Kukut M, Hacaloglu JE, Yagci Y, European Polymer Journal., 48, 1755 (2012)
  22. Rutkowski P, Journal of Analytical and Applied Pyrolysis., 95, 38 (2012)
  23. Jakab E, Varhegyi G, Faix O, Journal of Analytical and Applied Pyrolysis., 56, 273 (2000)
  24. Kuppens T, Cornelissen T, Carleer R, Yperman J, Schreurs S, Jans M, Thewys T, Journal of Environmental Management., 91, 2736 (2010)
  25. ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil.
  26. Bhattacharya P, Hassan EB, Steele P, Cooper J, Ingram L, Bioresources., 5(2), 908 (2010)
  27. ISO 15512, Moisture Content by Karl Fischer.
  28. ISO 12185:1996, Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method.
  29. MSZ 24000-5:1978, Crude petroleum and petroleum products. Determination of heating value.
  30. MSZ 19971-1983, Crude petroleum and petroleum products. Determination of bromine number.
  31. ISO 3405:2000, Petroleum products . Determination of distillation characteristics at atmospheric pressure.
  32. ASTM D 6428, Standard Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection.
  33. ASTM D6366-99 Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection.
  34. Xu JM, Jiang JC, Lu YJ, Chen J, Bioresour. Technol., 100(20), 4867 (2009)
  35. Lopez A, Marco I, Cabellero BM, Laresgoiti MF, Adrados A, Waste Management., 28, 2013 (2009)
  36. Li W, Pan CY, Zhang QJ, Liu Z, Peng J, Chen P, Lou H, Zheng XM, Bioresour. Technol., 102(7), 4884 (2011)
  37. Miranda R, Yang JJ, Roy C, Vasile C, Polymer Degradation and Stability., 72, 469 (2001)
  38. Abbassi MA, Grioui N, Halouani K, Zoulalian A, Zeghmati B, Fuel Process. Technol., 90(10), 1278 (2009)
  39. Wang XQ, Saleh RY, Ozkan US, J. Catal., 231(1), 20 (2005)
  40. Kumar G, Panda AK, Singh RK, Journal of Fuel Chemistry and Technology., 38, 162 (2010)
  41. Williams PT, Nugranad N, Energy, 25(6), 493 (2000)
  42. Kim S, Waste Management., 21, 609 (2001)
  43. Lo´ pez A, Marco I, Caballero BM, Laresgoiti MF, Adrados A, Fuel Processing Technology., 92, 253 (2011)
  44. Zevenhoven R, Axelsen EP, Hupa M, Fuel, 81(4), 507 (2002)
  45. Islam MR, Parveen M, Haniu H, Bioresour. Technol., 101(11), 4162 (2010)