Detached eddy simulation (DES) of the liquid-phase turbulent flow in an unbaffled stirred tank agitated by a six-blade, 45 degrees-pitched blade turbine was performed in this study. The tank wall is cylindrical with no baffle and the fluid flow problem was solved in a single reference frame (SRF) rotating with the impeller. For the purpose of comparison, computation based on large eddy simulation (LES) was also carried out. The commercial code Fluent was used for all simulations. Predictions of the phase-averaged turbulent flow quantities and power consumption were conducted. Results obtained by DES were compared with experimental laser Doppler velocimetry (LDV) data from the literature and with the predictions obtained by LES. It was found that numerical results of mean velocity and turbulent kinetic energy profiles as well as the power consumption are in good agreement with the LDV data. When performed on the same computational grid, which is under-resolved in the sense of LES, DES allows better accuracy than LES in that it works better in the boundary layers on the surface of the impeller and the stirred tank walls. It can be concluded that DES has the potential to predict accurately the turbulent flow in stirred tanks and can be used as an effective tool to study the hydrodynamics in stirred tanks.