Organic photovoltaic devices that can be fabricated by simple processing techniques are under intense investigation in academic and industrial laboratories because of their potential to enable mass production of flexible and coste-ffective devices(1,2). Most of the attention has been focused on solution-processed polymer bulk-heterojunction (BHJ) solar cells3-7. A combination of polymer design, morphology control, structural insight and device engineering has led to power conversion efficiencies (PCEs) reaching the 6-8% range for conjugated polymer/fullerene blends(8,9). Solution-processed small-molecule BHJ (SM BHJ) solar cells have received less attention, and their efficiencies have remained below those of their polymeric counterparts(10). Here, we report efficient solution-processed SM BHJ solar cells based on a new molecular donor, DTS(PTTh(2))(2). A record PCE of 6.7% under AM 1.5G irradiation (100mWcm(-2)) is achieved for small-molecule BHJ devices from DTS(PTTh(2))(2) V PC(70)BM (donor to acceptor ratio of 7: 3). This high efficiency was obtained by using remarkably small percentages of solvent additive (0.25% v/v of 1,8-diiodooctane, DIO) during the film-forming process, which leads to reduced domain sizes in the BHJ layer. These results provide important progress for solution-processed organic photovoltaics and demonstrate that solar cells fabricated from small donor molecules can compete with their polymeric counterparts.