Macromolecular Research, Vol.22, No.2, 146-153, February, 2014
Influence of acrylonitrile content in styrene-acrylonitrile copolymer on the phase morphology and interfacial tension in blends of polycarbonate/styrene-acrylonitrile copolymer
E-mail:
We have studied the phase morphology and interfacial tension in blends of PC/styrene-acrylonitrile copolymer (SAN) as representatives of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) blends. To confirm how the acrylonitrile (AN) content of the SAN polymer influences the phase morphology and rheology, PC/SAN (90/10) blends with varying AN content ranging from 24 to 41 wt% with respect to the SAN were prepared using a twin-screw extruder. The interfacial tension of the blends was determined from the measured average particle radius and the relaxation time of the interface using Palierne’s emulsion model. The minimum interfacial tension and domain size occurred in the blend containing AN 28.5 wt% versus SAN. The interfacial tension results were consistent with the observed morphology and rheology of the blends. Because the viscosity of SAN polymers varied with the AN content and molecular weight, the effect of the viscosity ratio was also examined by Wu’s empirical expression.
Keywords:polycarbonate/acrylonitrile-butadiene-styrene;styrene-acrylonitrile;polymer blend;interfacial tension
- Paul DR, Barlow JW, Polymer, 25, 487 (1984)
- Kim WN, Burns CM, Polym. Eng. Sci., 28, 1115 (1998)
- Janarthanan V, Stein RS, Garrett PD, J. Polym. Sci. B: Polym. Phys., 31, 1995 (1993)
- Callaghan TA, Takakuwa K, Paul DR, Padwa AR, Polymer, 34(18), 3796 (1993)
- Hanafy GM, Madbouly SA, Ougizawa T, Inoue T, Polymer, 45(20), 6879 (2004)
- Anastasiadis SH, Chen JK, Koberstein JT, Siegel AF, Sohn JE, Emerson JA, J. Colloid Interface Sci., 119, 55 (1987)
- Demarquette NR, Kamal MR, Polym. Eng. Sci., 34(24), 1823 (1994)
- Kamal MR, Laifook R, Demarquette NR, Polym. Eng. Sci., 34(24), 1834 (1994)
- Coucoulas LM, Dawe RA, J. Colloid Interface Sci., 103, 230 (1985)
- Patterson HT, Hu KJ, Grindstaff TH, J. Polym. Sci. Part C, 34, 31 (1971)
- Joseph DD, Arney MS, Gillbert G, Hu H, Dulman D, Verdier C, Vinagre TM, J. Rheol., 36, 621 (1992)
- Son Y, Migler KB, Polymer, 43(10), 3001 (2002)
- Elmendrop J, J. Polym. Eng. Sci., 26, 418 (1986)
- Elemans PHM, Janssen JMH, Meijer HEH, J. Rheol., 34, 1311 (1990)
- Carriere CJ, Cohen A, Arends CB, J. Rheol., 33, 681 (1989)
- Cohen A, Carriere CJ, J. Rheol. Acta, 28, 223 (1989)
- Luciani A, Champagne MF, Utracki LA, J. Polym. Sci. B: Polym. Phys., 35(9), 1393 (1997)
- Kim JK, Jeong WY, Polymer, 42(9), 4423 (2001)
- Taylor GI, Proc. R. Soc. London Ser. A, 138, 41 (1932)
- Palierne JF, Rheol. Acta, 29, 204 (1990)
- Gramespacher H, Meissner J, J. Rheol., 36, 1127 (1992)
- Choi SJ, Schowalter WR, Phys. Fluids, 18, 420 (1975)
- Souza AMC, Demarquette NR, Polymer, 43(4), 1313 (2002)
- Sung YT, Han MS, Hyun JC, Kim WN, Lee HS, Polymer, 44(5), 1681 (2003)
- Shi D, Hu GH, Ke Z, Li RKY, Yin JH, Polymer, 47(13), 4659 (2006)
- Yoo TW, Yoon HG, Choi SJ, Kim MS, Kim YH, Kim WN, Macromol. Res., 18(6), 583 (2010)
- Lee YK, Lee HK, Yoo TW, Yoon HG, Kim WN, J. Appl. Polym. Sci., 127(2), 1416 (2013)
- Bousmina M, Rheol. Acta, 38(1), 73 (1999)
- de Souza AMC, Calvao PS, Demarquette NR, J. Appl. Polym. Sci., 129(3), 1280 (2013)
- Graebling D, Bekira A, Gallot Y, Muller R, Eur. Polym. J., 30, 301 (1994)
- Graebling D, Muller R, Palierne JF, Macromolecules, 26, 320 (1993)
- Ferry JD, in Viscoelastic Properties of Polymers, Wiley, New York, 1980, Chapter 3, pp 64-65.
- Tschoegl NW, The Phenomenological Theory of Linear Viscoelastic Behavior, Springer, Berlin, 1989, Chapter 4, pp 210-215.
- Honerkamp J, Weese J, Rheol. Acta, 32, 65 (1993)
- Kang EA, Kim JH, Kim CK, Oh SY, Rhee HW, Polym. Eng. Sci., 40(11), 2374 (2000)
- Wu S, Polym. Eng. Sci., 27, 335 (1987)
- Favis BD, Chalifoux JP, Polym. Eng. Sci., 27, 1591 (1987)
- Everaert V, Aerts L, Groeninckx G, Polymer, 40(24), 6627 (1999)
- Hietaoja PT, Holstimiettinen RM, Seppala JV, Ikkala OT, J. Appl. Polym. Sci., 54(11), 1613 (1994)
- Yang KM, Lee SH, Oh JM, Polym. Eng. Sci., 39(9), 1667 (1999)