화학공학소재연구정보센터
Applied Surface Science, Vol.265, 731-737, 2013
Microstructure and surface properties of lignocellulosic-based activated carbons
Low cost activated carbons have been produced via chemical activation, by using KOH at 700 degrees C, from the bamboo species Guadua Angustifolia and Bambusa Vulgaris Striata and the residues from shells of the fruits of Castanea Sativa and Juglans Regia as carbon precursors. The scanning electron microscopy micrographs show the conservation of the precursor shape in the case of the Guadua Angustifolia and Bambusa Vulgaris Striata activated carbons. Transmission electron microscopy analyses reveal that these materials consist of carbon platelet-like particles with variable length and thickness, formed by highly disordered graphene-like layers with sp(2) content approximate to 95% and average mass density of 1.65 g/cm(3) (25% below standard graphite). Textural parameters indicate a high porosity development with surface areas ranging from 850 to 1100 m(2)/g and average pore width centered in the supermicropores range (1.3-1.8 nm). The electrochemical performance of the activated carbons shows specific capacitance values at low current density (1 mA/cm(2)) as high as 161 F/g in the Juglans Regia activated carbon, as a result of its textural parameters and the presence of pseudocapacitance derived from surface oxygenated acidic groups (mainly quinones and ethers) identified in this activated carbon. (c) 2012 Elsevier B.V. All rights reserved.