Modelling and testing of hybrid joints obtained by combination of two simple techniques, i.e., by application of spot welding and adhesive, is reported. The joints were subjected to uniaxial tension. The experiments were performed for: 1) a pure joining of the parts by spot welding and 2) spot welding-adhesive joining of the structural elements. A new experimental method was elaborated with application of two digital image correlation (DIC) systems. The method allowed for online monitoring of the deformation process of the joined elements with complex shapes. Modelling of the hybrid joints response to mechanical loading was performed by ABAQUS code. Damage process in the adhesive layer was taken into account. The obtained results lead to the conclusion that the strengthening of joints by the application of adhesive significantly improves static strength and energy absorption. The visible degradation process of the adhesive layer which started prior to the maximum value of force carrying the hybrid joint was obtained.