The motion of grain boundaries in zinc bicrystals (99.995 %) driven by the "magnetic" driving force was measured. An in situ technique for observations and continuous recording the boundary migration was applied. Planar symmetrical and asymmetrical tilt grain boundaries with rotation angles in the range between 60A degrees and 90A degrees were studied. The boundary migration was measured in the temperature regime between 330 and 415 A degrees C. The mobility of tilt boundaries in zinc and its temperature dependence were found to depend on the misorientation angle and the inclination of the boundary plane. An application of a magnetic field during the annealing of cold rolled (90 %) zinc-1.1 % aluminum alloy sheet specimens substantially affected the texture and microstructure evolution. This effect is attributed to the additional magnetic driving force for grain growth arising due to the magnetic anisotropy of zinc.