Catalytic hydrothermal upgradation of wheat husk was performed at 280 degrees C for 15 min in the presence of alkaline catalysts (KOH and K2CO3). The effect of alkaline catalysts on the yield of bio-oil products and composition of bio-oils obtained were discussed. Total bio-oil yield (31%) comprising of bio-oil1 (ether fraction) and bio-oil2 (acetone fraction) was maximum with K2CO3 solution. Powder XRD (X-ray diffraction) analysis of wheat husk as well as bio-residue samples show that the peaks due to cellulose, hemicellulose and lignin become weak in bio-residue samples which suggest that these components have undergone hydrolytic cleavage/decomposition. The FTIR spectra of bio-oils indicate that the lignin in the wheat husk samples was decomposed to low molecular weight phenolic compounds. H-1 Nuclear Magnetic Resonance (NMR) spectrum of bio-oil1 shows more than 50% of the protons resonate in the up field region from 0.5 ppm to 3.0 ppm. (C) 2013 Elsevier Ltd. All rights reserved.