Bioresource Technology, Vol.151, 137-143, 2014
The re-use of Waste-Activated Sludge as part of a "zero-sludge" strategy for wastewater treatments in the pulp and paper industry
The possibility of introducing the thermo-alkali hydrolysis of Waste-Activated Sludge (WAS) was investigated, in order to enable the use of its solid residue as a raw material in cardboard production and the use of its liquid portion for anaerobic digestion in an UASB reactor. The evaluation of the hydrolysis at pH > 12 and T = 70 degrees C showed that the microbe cells were disrupted with more than 90% efficiency in less than 2 h. The solid portion was hygienised, therefore making it possible to integrate it into the cardboard production as a raw material for less demanding cardboards. Up to 6% addition of the liquid portion of hydrolysed WAS to wastewater decreased the specific biogas production in a pilot-scale UASB from 0.236 to 0.212 m(3)/kg(COD), while the efficiency of the COD removal decreased from 80.4% to 76.5%. These values still guarantee an adequate treatment of the wastewater and an increased biogas production by 16%. (C) 2013 Elsevier Ltd. All rights reserved.
Keywords:Anaerobic digestion;Hydrolysis;Pulp and paper wastewater;Waste-activated sludge reuse;Zero sludge