화학공학소재연구정보센터
Chemical Engineering Journal, Vol.176, 302-311, 2011
Modelling product distribution of pyrolysis gasoline hydroprocessing on a Pt-Pd/HZSM-5 catalyst
The hydrocracking of pyrolysis gasoline (70 wt% of aromatics) has been studied using an integral fixed bed reactor with a Pt-Pd/HZSM-5 (0.2 wt% Pt, 0.48 wt% Pd; SiO2/Al2O3 = 19) catalyst over a wide range of experimental conditions: 350-450 degrees C; 20-50 bar; P-pyGas = 1 bar, H-2:PyGas molar ratio (n(H2)). 20-49; WHSV. 2.7-32 h(-1); Under these experimental conditions the deactivation is negligible and therefore data in the stationary state have been reported. Based on previous models for the hydrocracking of model compounds (methylcyclohexane and toluene), we have proposed a kinetic diagram and kinetic equations that satisfactorily describe the product distribution under the experimental conditions studied. The experimental data have been fitted to the proposed model and its parameters have been estimated. The kinetic model is used for reactor simulation and optimization. (C) 2011 Elsevier B.V. All rights reserved.