A new design of the multichannel reactor with a brass catalytic unit (52 mm diameter and 10 mm thick) containing 139 short channels (10 mm in length and 2 mm diameter) for the methanol steam reforming is presented. Compared to the conventional fixed-bed catalytic reactors, the multichannel reactor demonstrates low hydrodynamic resistance and low temperatures gradients. Thus, at the maximal flow rate, the pressure drop was only 0.025 torr while the temperature gradient along the catalytic unit axial section was only 0.8 degrees C/cm. The reactor is equipped with an iniegrated evaporation chamber and a special reagent feeding system to provide uniform flow distribution in all channels. A numerical simulation of the gas flow dynamics, performed with the Fluent 6.3 software package, showed that the maximum flow inhomogeneity in the channels was 0.47%. The tests of the multichannel reactor on the methanol steam reforming showed that at 270 degrees C, the hydrogen production rate was 110.5 l/h at the methanol conversion 76.7% and the concentration of carbon monoxide in the output mixture 0.56 mol%. (C) 2013 Elsevier B.V. All rights reserved.