화학공학소재연구정보센터
Energy Conversion and Management, Vol.83, 188-196, 2014
Numerical and experimental investigation of the self-inducing turbine aeration capacity
Self-inducing turbines are a model of mixers that ensure the aeration of a fluid field without using a sparger and a surface aerator. Nevertheless, this type of turbines remain quite complicated in terms of behavior of the fluid within the tank, and its actual aeration capacity varies depending on the type of turbine used. The studied turbine is self-inducing and made of three blades and each blade contains five holes. In this work, we evaluated experimentally - using the technique of dynamic oxygenation and deoxygenating - the aeration capacity of our impeller by calculating the volumetric mass transfer coefficient k(L)a for various submergences and various inclination angles of the blade. This work was then validated by a numerical modeling using the commercial code Fluent, and the flow within the tank as well as the evolution of the hydrodynamic parameters was also studied. The simulation is steady state with a VOF multiphase model and the realizable k-epsilon turbulence model. We finally concluded that k(L)a decreases with the increase of the inclination angle and with the increase of the submergence of our turbine. We could also study the hydrodynamic parameters of the flow such as the power number, the aeration number and the shear rate. (C) 2014 Elsevier Ltd. All rights reserved.