Fuel, Vol.111, 367-373, 2013
Experimental studies the burning process of gelled unsymmetrical dimethylhydrazine droplets under oxidant convective conditions
Gelled hypergolic propellants offer potential safety and performance improvements over conventional liquid and solid propellants. Understanding the combustion process of single gelled droplets is the first basic step to predict their behavior in the future combustion chambers. Experimental studies were performed to investigate the burning behavior of gelled unsymmetrical dimethylhydrazine (UDMH) droplets under oxidant convective conditions. The effects of oxidant convective conditions including velocity and temperature on the burning behavior were analyzed. The burning process was broken down into four stages: heating and swelling period, initial combustion period, violent combustion period, and stable and extinguished combustion period. Sometimes the droplet inside seemed to be porous or botryoidal. The microexplosion period lasted for a long time sometimes exceeding about 70% of the burning lifetime, and the phenomenon of gas jet combustion due to the burst steam from microexplosions was founded. The conversion of burning flame from a layered and enveloped flame structure to an escaped flame structure with increase in the convective velocity was observed. When the enveloped flame appeared, it was more helpful to the burning process, and the intensity of microexplosions and the burning rate constant were found to increase with the convective temperature. When the escaped flame appeared, it was disadvantageous to the burning process, and the intensity of microexplosions decreases with rise in convective velocity. Compared with the escaped flame, the intensity of microexplosions of the enveloped flame was lower, but the frequency was higher. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
Keywords:Organic gel propellant;UDMH;Burning behavior;Flame structure;Oxidizer convective environment