Numerical simulations are performed to study the transition of the development of the thermal boundary layer of air along an isothermal heated plate in a large channel which is bounded by an adiabatic plate. In particular, the aim is to investigate the effects of the channel width (b) on the transition of the flow under various plate temperatures. Three different RANS based turbulent k-epsilon models namely standard, RNG and Realizable with an enhanced wall function are employed in the simulations. The channel width was varied from 0.04 m to 0.45 m and the numerical results of the maximum values of the flow velocity, turbulent kinetic energy were recorded along the vertical axis to examine the critical distance of the developing flow. The results show that the transition delays when the width is increased from 0.04 m to 0.08 m and particularly, the critical distance at b = 0.08 m reaches its maximum with the Grashof number of 2.8 x 10(10). However, the critical distance drops when b is increased further from 0.08 m to 0.45 m, indicating an early transition of the flow. The transition remains unaffected by the adiabatic plate when b is greater than 0.45 m. Comparisons of selected numerical results are made with available experimental data of turbulent flow and a satisfied agreement is received. (c) 2013 Elsevier Ltd. All rights reserved.