Homogeneous charge compression ignition (HCCI) is a promising technique to achieve high thermal efficiency and clean exhaust with internal combustion engines. However, the difficulty in ensuring optimal ignition timing control prevents its practical application. Previous research has shown that adjusting the proportion of dimethyl ether (DME) and hydrogen-containing methanol-reformed gas (MRG) can control the ignition timing in an HCCI combustion engine fueled with the two fuels. As both DME and MRG can be produced in endothermic methanol reforming reactions, onboard reforming utilizing the exhaust gas heat can recover the waste heat from the engine. A very high overall thermal efficiency can be achieved by combining the high engine efficiency with HCCI and the waste heat recovery. This research investigates the basic characteristics of methanol reforming in a reactor tube with different catalysts with the aim to produce fuels for the HCCI combustion system. (C) 2009 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.