This paper presents a thermodynamic analysis of cryo-adsorption vessels for hydrogen storage. The analysis is carried out with an unsteady lumped model and gives a global assessment of the behavior of the storage system during operation (discharge), dormancy and filling. The adsorbent used is superactivated carbon AX-21 (TM). Cryogenic hydrogen storage, either by compression or adsorption, takes advantage of the effect of temperature on the storage density. In order to store 4.1 kg H(2) in 100 L, a pressure of 750 bar at 298 K is necessary, but only 150 bar at 77 K. The pressure is further reduced to 60 bar if the container is filled with pellets of activated carbon [7]. However, adsorption vessels are submitted to intrinsic thermal effects which considerably influence their dynamic behavior and due to which thermal management is required for smooth operation. In this analysis, among energy balances for filling and discharge processes, the influence of the intrinsic thermal effects during vessel operation is presented. Hydrogen losses during normal operation as well as during long periods of inactivity are also considered. The results are compared to those obtained in low-pressure and high-pressure insulated LH(2) and CH(2) tanks. (C) 2009 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.