In this work, a novel thermally coupled reactor containing the steam reforming process in the endothermic side and the hydrogenation of nitrobenzene to aniline in the exothermic side has been investigated. In this novel configuration, the conventional steam reforming process has been substituted by the recuperative coupled reactors which contain the steam reforming reactions in the tube side, and the hydrogenation reaction in the shell side. The co-current mode is investigated and the simulation results are compared with corresponding predictions for an industrial fixed-bed steam reformer reactor operated at the same feed conditions. The results show that although synthesis gas productivity is the same as conventional steam reformer reactor, but aniline is also produced as an additional valuable product. Also it does not need to burn at the furnace of steam reformer. The performance of the reactor is numerically investigated for different inlet temperature and molar flow rate of exothermic side. The reactor performance is analyzed based on methane conversion, hydrogen yield and nitrobenzene conversion. The results show that exothermic feed temperature of 1270 K can produce synthesis gas with 26% methane conversion (the same as conventional) and nitrobenzene conversion in the outlet of the reactor is improved to 100%. This new configuration eliminates huge fired furnace with high energy consumption in steam reforming process. (C) 2010 Professor T. Nejat Veziroglu. Published by Elsevier Ltd. All rights reserved.