This paper reports the effect of using a mixed iodide salt system with two dissimilar cations to enhance the efficiency of dye-sensitized solar cells made with polyvinylidenefluoride (PVdF) based gel electrolyte. Instead of a single iodide salt, a mixture of potassium iodide (KI) with a small K+ cation and tetrapropylammonium iodide (Pr4NI) with a bulky Pr4N+ cation were used to provide the required iodide ion conductivity. Solar cells of configuration FTO/TiO2/Dye/electrolyte/Pt/FTO were fabricated using a mesoporous TiO2 electrode sensitized with a Ruthenium dye (N719). With identical electrolyte compositions, the cells with KI and Pr4NI alone gave efficiencies of 2.37% and 2.90% respectively. The cell with the mixed iodide system, KI:Pr4NI = 16.6:83.4 (% weight ratio), however, showed an enhanced efficiency of 3.92% with a short circuit current density of 9.16 mA cm(-2), open circuit voltage of 674.4 mV and a fill factor of 63.4%. Copyright (C) 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.