We report on a new pitch reduction lithographic technique by utilizing pressure-assisted selective wetting and thermal reflow. The primary line-and-space pattern of low molecular weight polystyrene (PS) (Mw = 17,300) was formed by solvent-assisted capillary force lithography (CFL), on which a diluted photoresist (PR) solution was selectively filled into the spaces by the application of a slight pressure (200 g cm(-2)). Subsequent removal of the PS pattern by toluene and ashing process led to a line pattern with approximately 50% pitch reduction. It was observed that the size reduction and space to width ratios were controllable by changing PR concentration and ashing time. (C) 2012 Elsevier Inc. All rights reserved.