This study was conducted to evaluate the influence of thermal treatment (74, 82, and 90 degrees C), glycerol (30%, 35%, and 40%, w/w) and protein concentrations (3.0%, 3.5%, and 4.0% w/w) of film-forming solution on the properties of Argentine anchovy (Engraulis anchoita) protein isolate (API) films produced by casting. The API presented 88.8% of proteins, 5.5% moisture, 1.3% lipids, 1.0% ash and 53.3% of polar amino acids. The DSC of protein isolate was observed at maximum temperature of 62.2 degrees C and Delta H 6.4 J/g. The thickness, water vapor permeability, color difference and opacity of the films were not affected by the experimental variables studied (p > 0.05). The lowest solubility, elongation, and highest tensile strength of the films occurred at low temperature, low protein and glycerol concentrations (p < 0.05). Micrographs obtained by scanning electron microscopy of the films showed homogeneous surfaces at low temperature. (C) 2013 Elsevier Ltd. All rights reserved.